User Manual

21
Pairing the Device - Security Pan Tilt Camera
Before you start the pairing process, make sure
your camera is powered and contains a microSD
card in the microSD card slot. If you need
information on how to install your camera, refer to
the quick start guide that came with it.
At this point, you should check that your phone is
connected to a 2.4GHz Wi-Fi network and you have
the Wi-Fi network password handy. Your phone's
Location (GPS) setting should also be switched on
as the app requires this permission temporarily to
detect Wi-Fi networks during pairing.
Tap the Start button to proceed.
Scan the camera's QR code. The QR code's location
is generally found under the base of the camera, as
shown below.
(Continued on the next page)
If your phone can’t scan the QR code, tap the
Manual Pair button at the bottom of the QR
code scanning screen, select "Security Pan Tilt
Camera" from the product menu, and type in
the camera's ID (consists of 12 alphanumeric
characters) located on this sticker label.
S/N:10052081900001
ID:900a1af64589