User Manual

31
Pairing the Device - Wi-Fi Floodlight Security Camera
(Continued on the next page)
If your phone can’t scan the QR code, tap the
Manual Pair button at the bottom of the QR
code scanning screen, select "Wi-Fi Floodlight
Security Camera" from the product menu,
and type in the camera's ID (consists of 12
alphanumeric characters) located on this
sticker label.
S/N:89052081900001
ID:
990a1af6da5a
Before you start the pairing process, make sure
your camera is powered. If you need information on
how to power your camera, refer to the quick start
guide that came with it.
At this point, you should check that your phone is
connected to a 2.4GHz Wi-Fi network and you have
the Wi-Fi network password handy. Your phone's
Location (GPS) setting should also be switched on
as the app requires this permission temporarily to
detect Wi-Fi networks during pairing.
Tap the Start button to proceed.
Scan the camera's QR code. The QR code's location
is generally found on the back of the camera, as
shown below.