User Manual

39
Return to the Live View tab camera dashboard.
The video window. Swipe left or right to display live video from the previous or next camera channel.
• You can turn your phone sideways for landscape view (fullscreen).
• You can zoom in or out on the video. Use two fingers to pinch and spread out to zoom in on an area, and
pinch back to zoom out.
Tap to take a snapshot with the camera. You can find your snapshots on your phone’s internal memory in the
“swannsecurity/images” folder.
Tap to activate or deactivate the camera's 2-way audio mode. When activated, press and hold the
icon in
the video window to talk. Release the
icon to listen.
Note: This icon will not be shown if the camera is not capable of this function.
Tap to turn on or off the camera's spotlight.
Note: This icon will not be shown if the camera is not capable of this function.
Tap to turn on or off the camera's built-in siren.
Note: This icon will not be shown if the camera is not capable of this function.
Toggle between different aspect ratios - Original (match the camera's aspect ratio), 16:9, 4:3,
Stretch (expand to fill the entire video window)
Toggle between Low, Medium, and High video quality. The High quality setting will display clear, sharp HD video,
but the bandwidth required to stream video will be much higher and you'll need high-speed internet on both ends
of the connection. Lower video quality settings use less bandwidth (SD) and may result in smoother video.
Tap to start recording a video clip with the camera. Tap again to stop the recording. Each time you take a video
clip, the clip is added to the Recordings section (Menu > Recordings) of the app.
You can also find your recordings on your phone’s internal memory in the “swannsecurity/record” folder.
2
3
5
6
7
8
9
4
11
4
5
6
7
3
8
9
1
2
Single Camera View Mode - CCTV System