User Manual
Table Of Contents
- Contents
- Getting Started
- Installing the Swann Security App
- Creating your Swann Security Account
- Pairing the Device
- Pairing the Device - CCTV System
- Pairing the Device - Alert Indoor Camera
- Pairing the Device - Security Tracker Camera
- Pairing the Device - Security Pan Tilt Camera
- Pairing the Device - Spotlight Outdoor Camera
- Pairing the Device - Wi-Fi Floodlight Security Camera
- About the App Interface
- Navigation Bar
- Live View Tab - CCTV System
- Live View Tab - Wi-Fi Cameras
- Single Camera View Mode - Alert Indoor Camera
- Single Camera View Mode - Security Tracker Camera
- Single Camera View Mode - Security Pan Tilt Camera
- Single Camera View Mode - Security Pan Tilt Camera: Pan & Tilt Control Panel
- Single Camera View Mode - Spotlight Outdoor Camera
- Single Camera View Mode - Wi-Fi Floodlight Security Camera
- Playback Tab
- Notifications Tab
- Menu
- Profile
- Device Settings
- CCTV System - Settings Overview
- Alert Indoor Camera - Settings Overview
- Alert Indoor Camera - Camera Settings
- Alert Indoor Camera - Motion Settings
- Security Tracker Camera - Settings Overview
- Security Tracker Camera - Camera Settings
- Security Tracker Camera - Motion Settings
- Security Pan Tilt Camera - Settings Overview
- Security Pan Tilt Camera - Camera Settings
- Security Pan Tilt Camera - Motion Settings
- Security Pan Tilt Camera - Pan & Tilt Settings
- Spotlight Outdoor Camera - Settings Overview
- Spotlight Outdoor Camera - Camera Settings
- Spotlight Outdoor Camera - Motion Settings
- Wi-Fi Floodlight Security Camera - Settings Overview
- Wi-Fi Floodlight Security Camera - Camera Settings
- Wi-Fi Floodlight Security Camera - Motion Settings
- Appendix
42
Single Camera View Mode - Security Tracker Camera
Return to the Live View tab camera dashboard.
Displays the Wi-Fi signal strength of the camera.
The video window. Swipe left or right to display live video from the previous or next camera, if available.
• In Dual view, the top window shows the panoramic (180°) wide angle camera stream and the bottom window
shows the zoom camera stream which will track and focus on the movements of the detected person.
• You can tap
and configure the video window to only show the Panoramic view, the Zoom view or both (Dual).
•
indicates that motion has been detected by the camera.
• You can turn your phone sideways to view the video window in landscape (fullscreen) mode.
Tap to take a snapshot with the camera. You can find your snapshots on your phone’s internal memory in the
“swannsecurity/images” folder.
Tap to turn on the 2-way audio and talk to visitors through the camera's speaker. Tap again to turn it off.
Tap to turn on or off the camera's built-in siren.
Note: If the camera's built-in siren has been triggered automatically by motion, you can manually turn it off by
tapping this icon twice.
Tap to display the PTZ control panel. This feature allows you to digitally pan, tilt and zoom on the camera's Zoom
view window. Tap again to hide the PTZ control panel.
Tap to toggle the view in the video window between Dual, Panoramic and Zoom. This also affects the view displayed
in the camera tile on the Live View tab.
Toggle between live video quality settings. The High quality setting will display clear, sharp HD video, but the
bandwidth required to stream video will be much higher and you'll need high-speed internet on both ends of the
connection. We recommend using the Low quality setting if your Wi-Fi/cellular connection is slow (for example, your
phone is showing only 1 signal bar) as less bandwidth is used and this may result in smoother (SD) video.
Tap to start recording a video clip with the camera. Tap again to stop the recording. Each time you take a video clip,
the clip is added to the Recordings section (Menu > Recordings) of the app.
Note: You can also find your recordings on your phone’s internal memory in the “swannsecurity/record” folder.
3
4
6
7
8
9
10
5
1
1
1
2
5 6 7 8 9
10
4
1
3
2