User Manual

45
Single Camera View Mode - Spotlight Outdoor Camera
Return to the Live View tab camera dashboard.
Displays the Wi-Fi signal strength of the camera.
The video window. Swipe left or right to display live video from the previous or next camera, if available.
• You can zoom in or out on the video. Use two fingers to pinch and spread out to zoom in on an area, and
pinch back to zoom out.
• You can turn your phone sideways to view the video window in landscape (fullscreen) mode.
Tap to take a snapshot with the camera. You can find your snapshots on your phone’s internal memory in the
“swannsecurity/images” folder.
Tap to turn on the 2-way audio and talk to visitors through the camera's speaker. Tap again to turn it off.
Tap to turn on or off the camera's built-in spotlights.
Tap to turn on or off the camera's built-in siren.
Note: If the camera's built-in siren has been triggered automatically by motion or sound, you can manually turn
it off by tapping this icon twice.
Toggle between live video quality settings. The High quality setting will display clear, sharp HD video, but the
bandwidth required to stream video will be much higher and you'll need high-speed internet on both ends of the
connection. We recommend using the Low quality setting if your Wi-Fi/cellular connection is slow (for example, your
phone is showing only 1 signal bar) as less bandwidth is used and this may result in smoother (SD) video.
Tap to start recording a video clip with the camera. Tap again to stop the recording. Each time you take a video
clip, the clip is added to the Recordings section (Menu > Recordings) of the app.
Note: You can also find your recordings on your phone’s internal memory in the “swannsecurity/record” folder.
3
4
6
7
8
9
5
1
1
1
2
5 6 7 8
9
4
1
3
2