User Manual

Table Of Contents

Alert Indoor Camera - Motion Settings

Select the motion sensitivity level to optimize motion detection recordings for your home environment.

Higher sensitivity settings will increase the distance at which motion events can be detected. Use lower

settings to reduce detection range and minimize unwanted recordings. Selecting Off turns off motion

detection completely.

Receive person detection alerts when the camera detects the presence of a person in the motion event. The

higher the person detection sensitivity, the more sensitive the camera is in distinguishing between human

shapes and other motion objects further away. Selecting Off turns off person detection completely. Please

note that, to use this feature, the Motion Detection sensitivity setting (above) must not be Off.

Select the sound detection sensitivity level needed to trigger recordings.

• The highest sensitivity level (Max) will detect most ambient sounds—even the quietest of sounds like

whispers or keyboard typing.

• The lowest sensitivity level (Loud) will only detect very loud noises like vacuum cleaners, smoke alarms

or baby crying.

• If you're getting too many sound detection alerts even on the lowest sensitivity, you can adjust the

camera's microphone volume level, lowering it to 90 or below in Camera Settings > Audio > Mic Volume.

This will further reduce the camera's microphone sensitivity to background noise.

• Every home environment is unique, so we recommend experimenting with the sound sensitivity settings

to find out which works best for yours. You can also adjust and finetune the microphone volume level of

the camera to suit the location.

• To turn off sound detection completely, select Off.

Select how long the camera's siren will stay on when motion or sound is detected.

Note: Please exercise discretion and good judgment when deciding to activate the siren. Make sure to

comply with all local noise regulations.

Apply any changes you've made to the camera's detection settings.