User Manual

Table Of Contents

Access the event clips stored on the camera’s microSD memory card. When the memory card is full, the

oldest clips will be overwritten.

Adjust the camera's settings such as the video stream quality, image flip, image mirror, microphone volume,

and speaker volume. See "Security Pan Tilt Camera - Camera Settings" on page 63.

Check for camera firmware updates. New firmware may from time to time be available for your camera to

improve the performance, fix bugs, or roll out new features and enhancements.

Adjust the camera's detection settings such as the motion detection sensitivity and the siren duration.

See "Security Pan Tilt Camera - Motion Settings" on page 64.

Perform general maintenance such as rebooting the camera, restoring default settings, formatting the

microSD memory card, and factory reset.

Note: Factory resetting your camera is usually only necessary for troubleshooting. It isn’t something to do

lightly as it will format the microSD memory card, wipe the current Wi-Fi information, and return all of the

camera settings to factory default. See "Factory Resetting the Camera" on page 78.

Adjust the camera's pan and tilt settings such as the privacy mode position and pan/tilt movement speed.

See "Security Pan Tilt Camera - Pan & Tilt Settings" on page 65.

View technical information about the camera such as the model name, firmware version, installation date,

MAC address and Wi-Fi IP address.

Tap to remove (unpair) the camera from your Swann Security account. In some cases, you might need to

unpair your camera. For example, if you want to use your camera with a different Swann Security account or

if you give away your camera to a family member, you need to unpair it first.

Note: When you remove the camera from your Swann Security account, all event clips on the camera's

microSD memory card are deleted.

Security Pan Tilt Camera - Settings Overview