User Manual

Table Of Contents

Spotlight Outdoor Camera - Camera Settings

Select the mode according to where your camera is physically located.

Select the quality of the camera's live video stream. If live video takes a long time to load or stutters during

streaming, this may be caused by a slow or unstable internet connection —try using the Low (SD) setting

which may help improve loading times and provide smoother video performance as less internet bandwidth is

used to stream live video.

Note: This setting does not affect the video quality of motion/sound recordings as they are always captured in

HD resolution.

If your camera is used in Indoor mode, you can set your camera's frequency to match with your country's

electrical frequency. This can help prevent video flicker caused by fluorescent lights.

• 50Hz (for Australia/UK)

• 60Hz (for North America)

Lets you horizontally reverse the orientation of the camera's video display.

Adjust the camera's microphone volume. You can also turn the camera's microphone off by sliding the level

all the way to the left. Please note that decreasing the microphone volume level will also reduce the sound

detection sensitivity.

Adjust the camera's speaker volume. You can also turn the camera's speaker off by sliding the level all the

way to the left. Please note that decreasing the speaker volume level will also reduce the volume of the built-

in siren.

Apply any changes you've made to the camera settings.

Lets you turn the camera's video display upside down. This is useful if your camera has been mounted upside

down.