User Manual

78
Factory Resetting the Camera
Factory resetting your camera is usually only necessary for troubleshooting. It isn’t something to do lightly as it
will format the internal memory/microSD card (i.e., erase all locally stored clips), wipe the current Wi-Fi pairing
information, and return all of the camera settings to the original factory defaults.
Note: Factory resetting your camera does not remove (unlink) it from your Swann Security account. If you're giving
your camera to somebody else, make sure to remove it from your account first via the camera settings in the app.
To perform a factory reset on your camera, follow the steps described in section A if the camera is currently
connected to Wi-Fi or section B if the camera is not currently connected to Wi-Fi.
1. From the app, go to the camera's Settings > Admin.
A If the camera is currently connected to Wi-Fi
2. Tap the Factory Reset button.
The camera will reset to factory defaults and restart automatically. When the camera starts blinking blue slowly,
this indicates that it is in pairing mode and ready for setup.