User Manual

80
Changing the Camera's Wi-Fi Network
You can easily change the Wi-Fi network that your camera is using, if your home has multiple Wi-Fi access points or if
you have installed a new router. To change the Wi-Fi network, follow the steps described in section A if the camera is
currently connected to Wi-Fi or section B if the camera is not currently connected to Wi-Fi.
1. From the app, go to the camera's Settings > WiFi SSID.
From the app, go to Menu > Pair Device and perform the setup process for your camera again. This will allow you to pair
the camera to the new Wi-Fi network. For more information, see the pairing instructions relevant to your camera.
IMPORTANT: There is no need to remove the camera from your account first. Removing the camera from your account will
result in the deletion of all of the event clips stored locally on the camera's internal memory.
2. Enter the name of the new Wi-Fi network name (SSID) and password. Confirm the password in the Confirm Password
field. Make sure the home Wi-Fi network your camera will be joining is a 2.4GHz network. The Wi-Fi network
password is case sensitive, so enter it exactly the same as it was created or as found on your Wi-Fi router/
access point. Toggle
to make sure that you have entered the Wi-Fi network password correctly.
IMPORTANT: If the wrong Wi-Fi SSID or password is entered, the camera will fail to reconnect to Wi-Fi and you will
have to perform the camera setup process again as described in section B below.
3. Tap the OK button. The camera will save the new Wi-Fi settings and restart. This can take up to 2 minutes. The
camera tile on the Live View tab will refresh automatically and show livestream once the camera is connected to the
new Wi-Fi network.
A If the camera is currently connected to Wi-Fi
B If the camera is not currently connected to Wi-Fi