User Manual

Click for contents
38
Spotlight and Siren Detection Setup
1. Place the mouse inside the cell or square surrounded by a yellow border (as
illustrated on the left). Press and hold the left mouse button, click and drag
to the bottom right-hand corner then release the mouse. This will delete the
default spotlight and siren detection area.
2. To create a spotlight and siren motion detection area, select the cell or
square that you want to start at. Press and hold the left mouse button, click
and drag to select the area that you want to create then release the mouse.
3. Multiple areas can be created. Each individual square can be enabled to
trigger the spotlight and siren. The same action also applies to delete an area
that has been created.
In the example provided, a spotlight and siren detection area has been created
for the backyard and will trigger the spotlight and siren when one or more
objects gets closer to the rear of the house.
Movement outside of the spotlight and siren detection area will not trigger the
spotlight and siren.
4. Right-click the mouse to exit. Adjust the sensitivity if required.
5. Click the “Save” button to save changes made.
To delete the default
spotlight and siren de-
tection area, place your
mouse here.
Each individual square
can be enabled to trigger
the spotlight and siren.