User Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Image Control
- Display: Privacy Zone
- Creating a Privacy Mask
- Record: Mainstream (4K Camera)
- Record: Mainstream (5MP Camera)
- Record: Substream (4K Camera)
- Record: Substream (5MP Camera)
- Record: Mobilestream (4K Camera)
- Alarm: Motion
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent (Spotlight Security Camera)
- Spotlight and Siren Detection Setup
- Spotlight and Siren Trigger Schedule
- Device: PTZ
- Controlling your PTZ Camera
- Creating a Preset
- Display: IP Channel
- Analytics (4K Camera)
- Analytics: PID (Perimeter Intrusion Detection)
- Drawing a Perimeter Intrusion Region
- Analytics: LCD (Line Crossing Detection)
- Drawing a Detection Line
- Analytics: SOD (Stationary Object Detection)
- Drawing an Object Detection Region
- Analytics: PD (Pedestrian Detection)
- Drawing a Pedestrian Detection Region
- Analytics: FD (Face Detection)
- Drawing a Face Detection Region
- Analytics: CC (Cross Counting)
- Drawing a Counting Line
- Analytics: SD (Sound Detection)
- Recording Configuration
- Record: Record
- Record: Schedule
- Capture: Capture
- Capture: Schedule
- Analytics: Schedule (4K Camera)
- Playback & Backup
- Search: General
Click for contents
92
Advanced: Maintain
IPC Upgrade: Click this button to upgrade the camera’s firmware from a USB
flash drive. Select the firmware file, click the checkbox for the camera that
you want to upgrade or click “All” to select all cameras then click “OK” to
confirm. When the firmware upgrade has completed, the camera will mo-
mentarily reset. Click “OK” to close. It’s recommended to reboot your NVR to
maintain operational integrity.
Please note: To restore all default settings on your NVR, you need to
restore your NVR and camera (changes to image settings are stored on
the camera).
· Don’t forget to click “Save”
to apply settings.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.