Quick Start Guide

3
EN
GETTING STARTED
Before using the camera for the first time, charge it for at least two hours with the included micro USB
charging cable.
1 Lift the rubber cover of the micro USB port on the bottom of the camera.
2 Insert the smaller end of the micro USB charging cable into the micro USB port on the camera.
3 Insert the larger end of the micro USB charging cable into a USB wall charger such as the USB
power adapter that came with your smartphone.
4 The LED indicator on the front of the camera turns solid blue indicating that the camera is
charging. When the camera is fully charged, the LED indicator will turn off.
5 Actual charging times may vary depending on the USB power supply (DC5V 2.0A is recommended
for faster charging) and the remaining battery level. A full charge may take up to 11 hours (due to
the camera’s large battery capacity).
Note Once you have set up your camera, you can easily track the charging progress (%) using the app.
A microSD card is required for the camera to record events. Depending on the model purchased, your
camera will come with a pre-installed 16GB or 32GB microSD card. You can easily replace the microSD
card with a new one (up to 128GB, minimum Class 10 recommended) if needed in the future. Simply lift
the rubber cover on the top of the camera, eject the current microSD card (push in until it clicks) from
the microSD card slot and then replace with another microSD card (with the label side facing the back
of the camera). Format any microSD card being used with the camera for the first time using the app.
Charging the camera
Installing the microSD card