User Manual

13
Click for contents
Display: Live
Camera SET: There are two options available. The first option (Camera Type)
is used to instruct your DVR on the camera type connected. For the cameras
included with your DVR, leave the default setting. However, if you are con-
necting cameras that you have purchased previously or upgrading from an
older security system and the image is black & white, change this to TVI or
AHD, depending on your camera type. Click the “Setup” button then select
the camera type for your camera. If the image is in color, the correct camera
type has been selected.
The second option (EQ Levels) can be used to compensate for any discrep-
ancies that might be visible in the image quality. This may occur when using
extra long coaxial cables or if there is interference from electrical wiring or
other power sources. The discrepancy may look like an old TV set that has
bad reception. Click the drop down menu and change the level in small doses
until you are satisfied with the image quality.
Covert: When enabled, the camera will detect motion and trigger your DVR
to record, but you will not see an image of the camera in Live View mode.
This may be suitable if your DVR and TV are displayed in a public area (shop,
warehouse, school, etc.), but you don’t want others to see an image from the
camera.
Show Time: By default, the date and time is displayed in Live View mode. You
can disable this if you wish.
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.