User Manual

Click for contents
17
Motion
Channel: Select a camera that you would like to configure.
Detection: By default, your NVR will record motion only if one or more objects
have been detected by the camera and the camera’s built-in PIR sensor. This
provides more accurate motion detection by eliminating false triggers (see
page 21 - Thermal-Sensing Camera Tips). If you’re monitoring an area that
doesn’t require objects to be detected by the camera’s built-in PIR sensor,
such as a busy walkway or a building entrance, change this to “Motion”.
Motion Detection: Click the “Set” button to change the default motion detec-
tion area. The entire view of the camera is enabled for motion detection, how-
ever this can be changed if you wish (see page 18 - Motion Detection Setup).
Sensitivity: Click the “Set” button to change the sensitivity level for the time
periods available. Conduct a test to see if the sensitivity level is correct for the
camera’s location (see page 20 - Motion Detection Tips).
Schedule: Click the “Set” button to change the default motion schedule (see
page 19 - Motion: Schedule).
Send Email: Click the checkbox to send an email when motion has been de-
tected.
Push: By default, you will receive notifications via the AlwaysSafe app when
motion has been detected. Click the checkbox if you don’t want to receive no-
tifications. Please note, the Push function has to be enabled in the AlwaysSafe
app (see page 48 - Device Settings).
→ Click the “Default” button to revert back to default settings.
→ Use the “Copy to” button to apply all settings to the other cameras.
→ Don’t forget to click “Apply” to save settings.