User Manual

Click for contents
39
Network: Advanced
Email Settings: Click the “Set” button if any changes are required to your
email account (see page 40 - Email Settings).
Server Port: This port number is used by your NVR to send information
through. The default number will work in most situations.
HTTP Port: This port number is used to log into your NVR from a remote
location. The default number will work in most situations.
NTP (Network Time Protocol): This function allows your NVR to automat-
ically sync its clock with a time server. This gives it the ability to constantly
have an accurate time setting (your NVR will periodically sync automatically).
UID enable: This is part of SwannLink and is enabled by default.
UID: This is your NVR’s unique identification code. Click “Send UID” to send
this to your email address.
→ Click the “Default” button to revert back to default settings.
→ Don’t forget to click “Apply” to save settings.