User Manual

Click for contents
49
Device Settings: Video & Audio
Video & Audio
Display: Tap to customise the camera’s display settings (see page 50 - Device Settings: Display).
Quality: Tap to change settings for the Clear (Mainstream) and Fluent (Substream) video streams:
Resolution: For Clear, the default resolution is 1080P. A lower resolution is available allowing you
to stream at a higher frame rate (up to 25fps). For Fluent, the default resolution be changed.
Frame Rate(fps): The number of frames per second (fps) that your NVR will stream. The higher
the frame rate, the smoother the movement of people and objects will be. If the image appears
delayed or the audio is out of sync when talking to the camera, change the frame rate to lower the
amount of bandwidth required.
Max Bitrate(kbps): Select the maximum bitrate that can be utilized by your NVR to stream video.
The higher the bitrate, the better (finer detail and sharper) the quality of the streaming video will
be, but a fast internet connection with adequate bandwidth is required.
Encode Sound: If audio isn’t required in the video stream, tap the switch to disable.
Please note: In most circumstances, the default settings will be suitable for your NVR to
stream video over a fast internet connection. If the video loads slowly or frequently stops, try
adjusting the settings above to improve performance.