User Manual

Click for contents
14
Channel: Managing Cameras
Accessing the Device List displays the cameras that are currently configured,
the IP address and status for each camera as well as the ability to assign a
different channel number or to disconnect a camera.
You can also permanently change the position the camera is viewed in Live
View mode, for example, a camera installed at the front entrance is currently
assigned to Channel4 (bottom right in Live View mode), and you would prefer
if this was positioned top left which is assigned to Channel1 (you can change
the camera position in Live View mode, however rebooting the NVR will revert
back to the original position).
Channel1: Top left, Channel2: Top right, Channel3: Bottom left, Channel4:
Bottom right
To access the Device List, right-click the mouse in Live View mode to access
the Menu Bar then click the “Channel” button.
When assigning a different channel number, each camera must have a
unique number, they cannot share a channel number.
If you have removed a camera and/or adding a new one, in the line of the
old camera, click the down facing arrow on said camera and click the empty
square (Disconnect) next to (4) as shown above.
→ Click the “Refresh” button to refresh the Device List.
→ Click the “Cancel” button to exit.
→ Don’t forget to click “Apply” to save settings.