User Manual

Click for contents
40
Email Settings
Enable SSL or TLS: This is enabled by default and is required by most email
providers.
SMTP Server: Gmail select smtp.gmail.com. Outlook select smtp.live.com.
Click the “Other” checkbox if you would like to use your own email server.
SMTP Port: Change this to 587 for both Gmail and Outlook.com.
Sender Address: Input the email address for the account you created.
Sender Password: Input the email password for the account you created.
Click the “Show Password” checkbox to show your password.
Recipient Address: Input an email address that you want to send email alerts
to. You can input up to three different email addresses.
Interval: This is the length of time that must elapse after your NVR sends an
email alert before it will send another. Adjust accordingly.
Attach Type: Select the attachment type (picture or video) that you want to
receive with your email alerts.
Test: Click to verify the information you entered is correct then click “OK”.
Email not working? Please try the following:
1. Check that your email user name and password are correct.
2. Located at the back of your NVR, you should see one or two flashing LEDs
(above the Ethernet port). If you don’t see this, disconnect then reconnect the
Ethernet cable or try a different port on your router.
3. Search “less secure apps” at support.swann.com.
→ Click the “Cancel” button to exit.
→ Don’t forget to click “Apply” to save settings.