User Manual

Click for contents
42
Network: Wi-Fi Setting (Station Mode)
Station mode allows wireless communication from your NVR to the router
to gain internet access. This gives you the flexibility of placing your NVR in a
different location, without having to be physically connected to your router.
In Station mode your cameras also connect to your router directly via Wi-Fi
rather than connect to your NVR, so please take the distance between your
cameras and your router into consideration when using this mode.
As mentioned in the on-screen message, make sure each camera has suc-
cessfully connected with your NVR before changing modes. This is very im-
portant as your NVR will instruct the cameras as to which mode has been
selected and will send the connection information to them over Wi-Fi. If you
see all four cameras in Live View mode, you’re good to go.
Wi-Fi Mode: Click the drop down menu, select “Station” then do the follow-
ing:
1. After a short moment, a list of Wi-Fi access points that your NVR detects,
will be shown. Select your Wi-Fi access point then click the next button (circle
& triangle).
2. Input the password for your Wi-Fi access point then click the next button
(circle & triangle). Make sure the password is correct before proceeding.
3. A message will appear on-screen stating that all cameras must be con-
nected before proceeding. Click the next button (circle & triangle).
4. The cameras connected to your NVR will be displayed. A tick icon will ap-
pear in each checkbox.
5. After a brief moment your NVR will reboot then you will see your cameras
in Live View mode. You can now disconnect the Ethernet cable connected to
your NVR’s Ethernet port.