EN Security Made Smarter Wi-Fi NVR Security Camera Heat & motion-sensing video transmitted wirelessly, sensor spotlights, sirens, 2-way audio & color night vision Instruction Manual
1 Introduction Congratulations on the purchase of your Swann Wi-Fi NVR Security Camera. • 1080p Full HD video transmitted wirelessly to your NVR • SwannNet™ technology for the best available Wi-Fi signal • Controllable sensor spotlights & sirens • True Detect™ heat & motion sensing Important instructions 1. Make sure the camera is fixed correctly and stable if fastened in place. 2. Never place strain of any kind on the power connection and/or power adapter. 3.
2 Connecting the Camera Connect the output on the power cable to the power input on the camera then connect the input on the power cable to the power adapter. The pair/reset button is used to restore factory default settings and to pair the camera to your NVR (if network settings are changed or when adding a new camera). Leave the antenna in a vertical position for best reception.
3 Pairing the Camera Channel 2 28/04/2021 01:14:41 PM Off-line Channel 3 Press the Pair button to commence pairing. 28/04/2021 01:14:41 PM Channel 4 28/04/2021 01:14:41 PM 1. In Live View mode, click a channel that you want to pair the camera to. 2. A Pair button appears. Press this button to commence pairing. A message will appear stating that you need to press the pair button on the camera. 3. Remove the cap covering the pair button. Press and hold the pair button for 3 seconds then release.
4 Mounting the Camera The camera can be mounted onto a flat surface using the screws and wall plugs provided. The surface must have sufficient strength to hold the camera (the camera illustrated is for instructional purposes only). → Position the camera in the location you want to mount it, and mark the screw holes on the surface to position the screws (a mounting template has been included). Then, using the appropriate screws for the surface you’re fixing the camera to, secure the camera in place.
5 Camera Location Tips 1. Take into consideration what you want to monitor and where you’ll get the best view of it. 2. How you’re going to connect the camera to your monitoring system; remember that cables and connections should be kept out of the weather. 3. How to keep the camera out of harm’s way. It’s recommended to mount your camera at an elevated position. 4. Place your camera as close to the area of interest as practicable.
Helpdesk & Resources Visit Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more.
