Installation Guide

— 4 —
Customer Service [phone] • www.aquaticbath.com
Installation Instructions
4-Piece A
2
Composite Shower System Models
Remove back wall, right side wall, and base.
11
Mark location of plumbing on shower wall. Refer to “Tub and Shower
Mounted Fitting” for measurements.
10
Check for level. Shim if necessary.
9
Slide right side wall into position. Be sure locking mechanism is engaged.
8
Level back wall vertically & horizontally. Shim if necessary.
7
Lift and place the back wall, making sure locking tabs are engaged.
6
INSTALLATION PROCEDURE, CONT.