Use and Care Guide

The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p [phone]
•
f [phone]
•
swanstone.com58 The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p [phone]
•
f [phone]
•
swanstone.com 59
T U B & S H OW E R
BA-3060 Veritek
®
Bath Alcove Walls
TUB ALCOVE WALLS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
S P E C I F I C AT I O N S
BA-3060 Veritek
®
Bath Alcove Walls
Tub Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
BA-3060 BA03060 30" D x 60" W* x 59-1/2" H 75 – 65 x 63 x 7 15.40
(762 mm x 1524 mm x 1511 mm)
*1-1/2" additional area required on outer edges of wall panels to accommodate
nail-up flange.
Kit Includes: One right side panel, one left side panel, one back panel with six
factory installed wall mounting clips, and complete installation instructions.
Packaging: Each kit is packed in a flat, rectangular carton.
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
F E AT U R E S
• Nails directly to studs for fast
installation
• Sturdy interlocking system for
one-piece appearance
• Panels easily fit through existing
doorways and can be installed
by one person
• Made of Veritek with no surface
coating to chip or crack
• The BA-3060 is a 3-piece
compression molded composite
material with molded-in color
and a natural gloss surface
• White (010)
• Bone (037)
• Bisque (018)
• Bermuda Sand (040)
• Gray Granite (042)
• Tahiti Desert (050)
60"
59-1/2"
1-1/4"
28-1/4"
28"
13"
18-3/4"
BA-3060
Designed to fit tub area
30" deep x 60" wide* x 59-1/2" high (762 mm x 1524 mm x 1511 mm)
Shower door opening size: 58-1/16" wide at tub ledge, 58" high
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with non-abrasive, liquid
cleaners, a sponge, soft cloth or Mr. Clean
Magic Eraser. For hard water stains or
mineral build-up, scale removers such
as Lime Away, Rust-out or Whink can be
used. To protect the finish, fiberglass wax
or automotive paste wax can be applied.
Do not use abrasive cleaners or pads.
Do not use “leave on” cleaning products
such as the Automatic Shower Cleaner.
Prolonged contact with harsh chemicals
could have an adverse reactive over
time and discolor your surfaces.
Do not
use cleaning agents that caution use on
acrylic, polyester or plastics.
BT-3060 L/R Veritek
®
Bathtub
BATHTUBS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
• White (010)
• Bone (037)
• Bisque (018)
• Bermuda Sand (040)
• Gray Granite (042)
• Tahiti Desert (050)
S P E C I F I C AT I O N S
BT-3060 L/R Veritek
®
Bathtub
Tub Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
BT-3060 L/R BT03060 LD/RD 30" W x 60" D 70 – 62 x 33 x 19 22.16
(762 mm x 1524 mm)
Kit Includes: One bathtub, six bathtub clips and complete installation
instructions.
Available in 5-packs BT 3060L5 and BT3060R5.
Packaging: Each kit is packed in a flat, rectangular carton.
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
F E AT U R E S
• The BT-3060 L/R is a compression
molded material with molded-in color
and a natural gloss surface for easy
cleaning
• Solid and granite colors match many
Swanstone and Veritek wall systems
• Generous 16" height is deeper than
a standard tub
• Pre-leveled bottom for easy installation
• Skid-resistant pattern molded into
bathtub
• Made of Veritek with no surface
coating to chip or crack —color runs
throughout
BT-3060 L/R Veritek
®
Bathtub
Designed to fit tub area
30" deep x 60" wide (762 mm x 1524 mm)
Capacity: 65 gallons to bottom of overflow
13-1/2" from bottom of tub to center line of overflow
Bathing well dimensions: 22-1/2" x 50" x 13" (572 mm x 1270 mm x 330 mm)
58"
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
60"
30"
16"
1-1/2"
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with non-abrasive, liquid
cleaners, a sponge, soft cloth or Mr. Clean
Magic Eraser. For hard water stains or
mineral build-up, scale removers such
as Lime Away, Rust-out or Whink can be
used. To protect the finish, fiberglass wax
or automotive paste wax can be applied.
Do not use abrasive cleaners or pads.
Do not use “leave on” cleaning products
such as the Automatic Shower Cleaner.
Prolonged contact with harsh chemicals
could have an adverse reactive over
time and discolor your surfaces.
Do not
use cleaning agents that caution use on
acrylic, polyester or plastics.