Dimensions Guide

The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p [phone]
•
f [phone]
•
swanstone.com106 The Swan Corporation
•
515 Olive Street, Suite 1800
•
St. Louis, MO 63101
•
p [phone]
•
f [phone]
•
swanstone.com 107
T U B & S H OW E R
F E AT U R E S
• Will not mold or mildew, no grout to clean
• Coordinates with Swanstone shower and bath systems
• Slip-resistant surface
• Made of Veritek with no surface coating to chip or crack
Nominal Rough-In Dimensions
Model Size 38" 37" 19" 18-1/2"
FTS-3738 37" x 38" 38-3/8" 37-3/16" 19-3/16" 18-9/16"
Shower Transfer Floor
Universal Design
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2–2005
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
Transfer Shower Floors
With Fit-Flo Drain
Veritek
®
SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
A C C E S S O R I E S
See page 109 for complete listing of all Universal Design accessories.
• White (010) • Bone (037) • Bisque (018)
S P E C I F I C AT I O N S
Transfer Shower Floors With Fit-Flo Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. UPS Dims. In. Cu. Ft.
FTS-3738 FF03738MD 37" D x 38" W 46 – 45 x 43 x 10 12
(940 mm x 965 mm)
Kit Includes: One code approved compression molded Veritek
®
shower floor
with molded-in Fit-Flo drain and complete installation instructions.
Packaging: Each floor packed in a rectangular carton.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
FTS-3738
38"
36"
36"
19"
1"
1"
37"
18
1
/
2
"
3" dia.
3
3
/
4
"
.0372" per foot
Slope: 1
3
/
4
°
7
/
32
"
2
1
/
4
"
2
3
/
8
" 1
7
/
8
"
7
/
32
"
.50"
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Everyday cleaning with liquid cleaners
such as Dow or Lysol foaming bubbles,
Top Job, Mr. Clean or similar type
products with a sponge or Mr. Clean
Magic Eraser. To remove hard water
stains or mineral build-up, scale removers
such as Lime Away, Rust-out or Whink
are recommended. Abrasive cleaners
are not recommended on shower bases
because they are designed with high
sheen areas to help prevent soap scum
build up. Prolonged scrubbing will dull
the surface over time and promote build-
up and soap scum.
Do not use “leave on”
cleaning products such as the Automatic
Shower Cleaner. Prolonged contact with
harsh chemicals could have an adverse
reactive over time and discolor your
surfaces.
Do not use cleaning agents
that caution use on acrylic, polyester
or plastics.
Barrier Free Shower Floors
With Fit-Flo Drain
Veritek
®
SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(see page 2 for detailed information)
F E AT U R E S
• Will not mold or mildew, no grout to clean
• Coordinates with Swanstone shower and bath systems
• Slip-resistant surface
• Made of Veritek with no surface coating to chip or crack
• FBF-3060 Can be recessed for flush mounting
or can be used with a ramp.
Nominal Rough-In Dimensions
Model Size 60" 30" 8" 15"
FBF-3060L 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (left side drain)
FBF-3060R 30" x 60" 60-3/8" 30-3/16" 8-3/16" 15-3/16"
Barrier Free (right side drain)
Universal Design
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2–2005
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
• White (010) • Bone (037) • Bisque (018)
A C C E S S O R I E S
See page 109 for complete listing of all Universal Design accessories.
S P E C I F I C AT I O N S
Barrier Free Shower Floors With Fit-Flo Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. UPS Dims. In. Cu. Ft.
FBF-3060L FB03060LM 30" D x 60" W – Left Drain 64 – 66 x 36 x 10 14
(762 mm x 1524 mm)
FBF-3060R FB03060RM 30" D x 60" W – Right Drain 64 – 66 x 36 x 10 14
(762 mm x 1524 mm)
FBF-1260 FB01260 12" D x 60" W – Ramp 25 – 66 x 14 x 2 1.07
(306 mm x 1524 mm)
Kit Includes: One code approved compression molded Veritek
®
shower floor
with molded-in Fit-Flo drain and complete installation instructions.
Packaging: Each floor packed in a rectangular carton.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
Barrier Free Shower Floors
Available in Right or Left Side Drain
FBF-1260 Shower Ramp
FBF-3060R
(shown)
CO L O R S
(See inside back cover for color sample.)
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Everyday cleaning with liquid cleaners
such as Dow or Lysol foaming bubbles,
Top Job, Mr. Clean or similar type
products with a sponge or Mr. Clean
Magic Eraser. To remove hard water
stains or mineral build-up, scale removers
such as Lime Away, Rust-out or Whink
are recommended. Abrasive cleaners
are not recommended on shower bases
because they are designed with high
sheen areas to help prevent soap scum
build up. Prolonged scrubbing will dull
the surface over time and promote build-
up and soap scum.
Do not use “leave on”
cleaning products such as the Automatic
Shower Cleaner. Prolonged contact with
harsh chemicals could have an adverse
reactive over time and discolor your
surfaces.
Do not use cleaning agents
that caution use on acrylic, polyester
or plastics.