Technical Specifications

Swan • St. Louis, MO 63101 • [phone] • swanstone.com
095-10-14
| 101
TUB AND SHOWER
FEATURES
• Will not mold or mildew, no grout to clean.
• Coordinates with Swanstone or Veritek
®
shower and bath systems.
• “S” pattern molded into floor provides a slip-resistant surface.
• Made of Veritek
®
with no surface coating to chip or crack.
Nominal Rough-In Dimensions
Model Size 38" 37" 19" 18-1/2"
FTS-3738 37" x 38" 38-3/8" 37-3/16" 19-3/16" 18-9/16"
Shower Transfer Floor
Universal Design
Transfer Shower Floors
With Fit-Flo™ Drain
Veritek
®
SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(See page 2 for detailed information.)
ACCESSORIES
See page 101 for complete listing of all Universal Design accessories.
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
SPECIFICATIONS
Transfer Shower Floors With Fit-Flo
™
Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
FTS-3738 FF03738MD 37" D x 38" W 46 – 45 x 43 x 10 12
(940 mm x 965 mm)
Includes: One code-approved compression-molded Veritek
®
shower floor with
molded-in Fit-Flo drain.
Packaging: Each floor packed in a rectangular carton.
IMPORTANT: Rough-in dimensions are provided for reference only.
You must measure the actual shower floor and check local building code
requirements before construction of the stud wall.
35"
35-1/2"
1-7/16"
1-7/16"
COLORS
(See inside back cover for color sample.)
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet.
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal-
scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.