Specification

Swan • St. Louis, MO 63101 • [phone] • swanstone.com 93
TUB AND SHOWER
Retrofit Shower Floors
With Fit-Flo™ Drain
Veritek
®
SHOWER FLOORS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Veritek
®
(See page 2 for detailed information.)
Nominal Rough-In Dimensions
Model Size 60" 32" 8" 15"
FR-3260L 32" x 60" 60-3/8" 32-3/16" 8-3/16" 15-3/16"
(Left Drain)
FR-3260R 32" x 60" 60-3/8" 32-3/16" 8-3/16" 15-3/16"
(Right Drain)
FEATURES
• Will not mold or mildew, no grout to clean.
• Coordinates with other Swanstone or Veritek
®
products.
• Pebbled, slip-resistant surface.
• Made of Veritek
®
with no surface coating to chip or crack.
• Without expensive plumbing re-work, this floor can be installed
in the same space once occupied by a standard bathtub.
• White (010)
• Bone (037)
• Bisque (018)
• Bright White (137)
• Pearl (138)
SPECIFICATIONS
Retrofit Shower Floors With Fit-Flo
™
Drain
Ship Ship Carton
Model Part Nominal Size Dimensions Wt. Lb. FedEx Dims. In. Cu. Ft.
FR-3260L FR3260LM 32" D x 60" W 56 – 66 x 37 x 10 15
(Left Drain) (813 mm x 1524 mm)
FR-3260R FR3260RM 32" D x 60" W 56 – 66 x 37 x 10 15
(Right Drain) (813 mm x 1524 mm)
Includes: One code-approved compression-molded Veritek
®
shower floor with
molded-in Fit-Flo drain and installation instructions.
Packaging: Each floor packed in a rectangular carton.
IMPORTANT: Rough-in dimensions are
provided for reference only. You must
measure the actual shower floor and
check local building code requirements
before construction of the stud wall.
Retrofit Shower Floor
left side drain
Retrofit Shower Floor
right side drain
COLORS
(See inside back cover for color sample.)
STANDARDS AND RATINGS
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—Listed
CSA Standard B45.5 by IAPMO
Uniform Plumbing Code (UPC)
For a complete list of tests and results see the Technical Data Sheet – page 175.
MAINTENANCE AND
CLEANING INFORMATION
Clean regularly with common household liquid
cleaners and a sponge or soft cloth. For hard
water stains, scale removers can be used. If
necessary, abrasive cleaners can be used with
a nylon brush or pad to remove build up on
the shower floor surface. Do not use a metal-
scouring pad or a wire brush, as it will damage
the surface. Do not use “leave on” cleaning
products, such as automatic spray shower
cleaners. Prolonged contact with harsh chemicals
could have an adverse reaction over time and
discolor surfaces. Do not use cleaning agents
that caution use on acrylic, polyester or plastics.
SUPPORT DOCUMENTS
Installation instructions available at swanstone.com.