Use and Care Guide

The Swan Corporation ❚ One City Centre Ste. 2300 ❚ St. Louis, MO 63101 ❚ p [phone] ❚ f [phone] ❚ www.swanstone.com
59
T U B & S H OW E R
SHOWER ALCOVE WALLS
SA-38 NEO Angle Shower Alcove Wall
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Swanstone Veritek
®
(see page 2 for detailed information)
S P E C I F I C AT I O N S
SA-38 NEO Veritek
®
Angle Shower Alcove Wall
Wall Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
SA-38 NEO NE00000SA 38" D x 38" W* x 72" H 84 – 76 x 36 x 13 20.58
(965 mm x 965 mm x 1829 mm)
Fits NEO shower floor size 38" D x 38" W (965 mm x 965 mm)
*1-1/2" additional area required on outer edges of wall panels to accommodate
nail-up flange.
Kit Includes: One right side panel, one left side panel, one corner panel, wall
mounting clips, and complete installation instructions.
Packaging: Each kit is packed in a flat, rectangular carton.
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American Society for Testing and Materials
National Electrical Manufacturers Association
F E AT U R E S
• Nails directly to studs for fast
installation
• Sturdy interlocking system for
one-piece appearance
• Panels easily fit through existing
doorways and can be installed
by one person
• Made of Veritek composite
material with no surface coating
to chip or crack
• The SA-38 NEO is a 3-piece
compression molded unit with a
natural gloss surface
• White (010)
• Bone (037)
• Bisque (018)
• Bermuda Sand (040)
• Gray Granite (042)
• Tahiti Desert (050)
C O L O R S
(See pg. 139 for color sample.)
SA-38 NEO
SA-38 NEO
Designed to fit wall areas
38" deep x 38" wide* x 72" high
(965 mm x 965 mm x 1829 mm)
8-1/2"
72"
1-1/4"
29"
51"
11-1/2"
18"
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with warm water; use soft
cloth with mild liquid detergent. Never use
abrasive scouring powders, cleaners or pads.
They will dull the finish. Protect finish with
any fiberglass wax or automotive paste wax.