Installation Instructions

STEP-BY-STEP

INSTALLATION INSTRUCTIONS

FOR NEO ANGLE PIVOT SHOWER ENCLOSURE

Inventory all shower door parts. Be sure you have purchased the correct shower door for the proper

Swanstone shower floor size.

The shower door is designed

to install over a Swanstone

shower floor. Under normal

installation, NO CUTTING WILL

BE REQUIRED.

Tools Required

• Ruler & Pencil

• Level

• Screwdriver (phillips head)

• Electric Drill

• 1/8” and 1/4” Drill Bit

• Tube of Caulk

Neo Angle Parts Lists

A. 2 Wall Jambs

B. 2 Side Panels

C. 1 Door Frame

D. 1 Drip Deflector

E. 1 Drip Vinyl

F. 6 #6 x 3/8” Pan Head

Tek Screws

G. 6 #8 x 1 1/2” Truss

Head Screws

H. 6 Plastic Wall Anchors

I. 6 #8 x 3/4” Flat Head

Screws

J. 1 Roll Double

Stick Tape

K&L included in the SD-A38

NEO unit only. See step 3a

if installing the SD-A38 NEO

unit.