Installation Guide

36"

1 1/2"

10"

INCLUDED IN CARTON:

A. Three sill/jamb panels

B. One tube of adhesive

C. One tube of silicone caulk

WINDOW TRIM KIT MODEL SS WTK

CAUTION:

Read ALL instructions carefully BEFORE starting your installation.

Save this manual for future reference

Option 1. Notching the sill panel only.

Option 4. Trimming to fit all panels with no

notching or mitering.

Option 3. Mitering all three panels.

Option 2. Notching the two jamb panels.

INSTALLATION OPTIONS

When installing the Swanstone Window Trim Kit, you have four options. Before you begin, decide on the application best suited for you.

Allow panels to adjust to room temperature for at least six hours (65⬚ - 90⬚F). The options are as illustrated below.

Installation Procedure for

Swanstone Window Trim Kit

MODEL SS WTK

PAGE 1
WINDOW TRIM KIT MODEL SS WTK Installation Procedure for Swanstone Window Trim Kit MODEL SS WTK INCLUDED IN CARTON: A. Three sill/jamb panels B. One tube of adhesive C. One tube of silicone caulk A A C B CAUTION: 10" Read ALL instructions carefully BEFORE starting your installation. A 1 1/2" 36" Save this manual for future reference INSTALLATION OPTIONS When installing the Swanstone Window Trim Kit, you have four options. Before you begin, decide on the application best suited for you.
PAGE 2
WINDOW TRIM KIT MODEL SS WTK TOOLS REQUIRED TO INSTALL The only tools needed are a saber saw, ruler, and caulking gun. DO NOT NAIL PANELS TO WINDOW SILL OR JAMBS. INSTALLATION PROCEDURE Remove unnecessary window moldings, if any, and clean area of dirt, chipped paint, loose plaster, etc. Depth of jamb Height of jamb Notched cut illustrated: Your cut may be different. A. Taking into account the installation option you choose, measure the side of the sill opening.