User's Manual

Doc. No. 702202-252-01 rev. 00
Page 16 of 42
Swarm®S2 Installation and User Manual
Last updated 2021-03-02
by Harald Sleire
© Sensorlink Swarm AS 2021
Step
Description
Illustration
22.
Open the Swarm S2 user interface and choose the right type of
ultrasound sensor and channel number the sensor is connected
to. Type the nominal thickness of the pipe and run the live view
of the trace.
23.
You should now see the ultrasound trace which is updated every
10-15 seconds.
You should now be able to clearly see at least 3 backwall echoes,
as shown in the picture for a 10mm thick sample.
24.
The installation of the sensor is now complete
Table 5 Swarm S2 LT Sensor installation