User’s Manual XV1-19AV-series
User’s Manual Index Index Troubleshooting 3 Safety Instructions Power 4 Installation 4 Cleaning 5 Other 5 6 Front 6 Rear 7 Connecting The Monitor 7 7 12 General 13 Plug & Play Capability 13 PowerSaver 13-14 Preset Timing Modes 14 Terms 15 For Better Display 16 Authority 16 Warranty and Service Terms 17-19 On-Screen Display Adjustable Values Q&A Information Setup Navigate The OSD 9-11 Specifications Introduction Unpacking Check List 8 3
User’s Manual Safety Instructions Power When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. If the size of your monitor is small, or if the same image is present for long periods of time , you may see afterimages due to damage to the flourescent substance on the inside of the TFT-LCD. Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands.
User’s Manual Safety Instructions Clean When cleaning the monitor case or the surface of the TFT-LCD , wipe with a slightly moistened, soft fabric. Do not spray detergent directly on the monitor. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector can cause an electric shock or fire. Do not set liquids, chemicals or any small metal objects on the monitor.
User’s Manual Introduction Unpacking Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. For SWEDX XV1-19AV series • • • • • • • • • Monitor AC/DC power adapter AC adapter Cord 15-pin D-sub signal cable User’s manual Warranty card (not available in all locations) Drivers installation CD (not available in all locations) Multimedia Cable (not available in all locations) Remote Control (not available in all locations) Front 1.
User’s Manual Introduction Rear The configuration at the back of the monitor may vary from product to product. 1. Power port 2. VGA-Signal port 3. S-Video port 4. Composite Video port 5. Audio-in left 6. Audio-in right 7. Audio-in from PC 8. Audio-out from Monitor Note: See "Connecting your monitor" for further Information regarding cable connections. Connecting The Monitor 1.
User’s Manual On-Screen Display “OSD” Adjustable values Picture Brightness: Contrast: H-Position: V-Position: Phase: Clock: Scaling: Adjust Adjust Adjust Adjust Adjust Adjust Adjust the the the the the the the brightness of the monitor’s entire display. contrast of the monitor’s entire display. horizontal position of the monitor’s entire display. vertical position of the monitor’s entire display. phase of the monitor’s entire display. frequency of the monitor’s entire display.
User’s Manual Troubleshooting Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please contact your dealer or visit our homepage http://www.swedx.com . Symptom No images on the screen. I can’t turn on the monitor. Check list Solution Is the power cord connected properly? Check the power cord connection and supply.
User’s Manual Troubleshooting Check List Symptom The image on the screen is shaking. Check list Solution Check the monitor configuration to see if it is in Interlace Mode. (Interlace Mode: Vertical frequency 43Hz, 87Hz(i),etc). The signal from the video card exceeds the maximum resolution and frequency of the monitor. Are there any magnetic products such as a power adapter, speaker or a high voltage wire near by? Move the monitor away from anything that can create a strong magnetic field.
User’s Manual Troubleshooting Check List Symptom Check list Solution The screen is out of focus or OSD cannot be adjusted. Have you adjusted the resolution or frequency to the monitor? Adjust the resolution and frequency at the video card. (Refer to the Preset Display Modes) LED is blinking but no images on the screen. Is the frequency properly adjusted when checking the Display Timing on the menu? Adjust the frequency properly by referring to the video card manual and the Preset Display Modes.
User’s Manual Troubleshooting Q&A Question Answer How can l change the frequency? Frequency can be changed by reconfiguring the video card. Note that video card support can vary, depending on the version of the driver used.(Refer to the computer or the video card manual for details.) How can l adjust the resolution? Windows 95/98/2000/NT/XP: Set the resolution at the Control Panel, Display, Setting. Windows 3.1: Change the resolution and the colors using the VGA Utility provided by the video card.
User’s Manual Specification General Features/Model Resolution Number of Pixels Active Area (mm) Pixel Pitch (mm) Mode Number of Colors Contrast Ratio Brightness (cd/m 2) Response Time (at 25jC) Viewing Angle (U/D/L/R) Backlight Outline Dimension (mm) Power Supply Voltage (V) Power Consumption XV1-19AV-*** SXGA 1.280x1.024 376.3x301.1 0.294 PVA 16.
User’s Manual Specification PowerSaver State Normal Operation Power Indicator Green Power Consumption Less than 40W Power Saving Mode EPA/EERGY 2000 Green, Blinking Less than 3W Power Switch off Lamp off Less than 1W This monitor is EPA ENERGY STAR ® compliant and ENERGY 2000 compliant when used with a computer equipped with DPMS functionality. SWEDX has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency.
User’s Manual Information Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the Dot Pitch. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called Vertical Frequency or Refresh Rate. Unit: Hz.
User’s Manual Information For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) in control panel of computer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD. Resolution: 1024 x 768 Vertical frequency (refresh rate): 60 Hz 2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 99.999% above is used for this product.
User’s Manual Warranty and Service Terms The following terms apply only to new "in the original carton" SWEDX products marketed and distributed by SWEDX, which are purchased and used by the original consumer purchaser. This information is subject to the terms and conditions of the written SWEDX warranty statement included with each product, and are available for examination from the dealer prior to purchase.
User’s Manual Warranty and Service Terms 3. Cosmetic damage by purchaser, such as markings, discoloration, scratches, dents, anti-theft devices markings, gouges or any other defacement 4. Physically damaged products by purchaser, such as broken PCB, Housing, damaged LCD Module 5. No Defect Found (product returned to SWEDX as defective but failure is not duplicated by SWEDX's test method.) 6. The product is not in accordance with the fault in the application 7.
User’s Manual Warranty and Service Terms SWEDX reserves the right to make final decisions regarding problem determination and the appropriate service option. Exchange units assume the remaining warranty of the original product. Please refer to your SWEDX Limited Warranty Statement for complete terms and conditions, as some models have other terms and conditions. Some limitations and restrictions apply and these programs are subject to change without prior notice.
Address: Landsvägen 3-5. S-192 70 Sollentuna. Stockholm. SWEDEN Phone:+46 8 4418444. Fax:+46 8 4418441 E-mail: info@swedx.com. Homepage: www.swedx.com.
