Operation Manual

Check List
Troubleshooting
Before calling for service, check the information in this section to see if
you can remedy any problems yourself. If you do need assistance, please
contact your dealer or visit our homepage .http://www.swedx.com
No images on the
screen. I can’t turn on
the monitor.
Is the power cord
connected properly?
Check the power cord
connection and supply.
Symptom Check list Solution
Can you see “No
Connection, Check
Signal Cable” on the
screen?
If the power is on,
reboot the computer to
see the initial screen
(the login screen).
Can you see “Video
mode not supported” on
the screen?
There is no image on the
screen. Is the power
indicator on the monitor
blinking at 1 second
intervals?
Check the signal cable
connection.
If the initial screen(the
login screen) appears,
boot the computer in the
applicable mode(the
safe mode for Windows
95/98/2000/NT/XP) and
then change the freq-
uency of the video card.
(Refer to the Preset
Display Modes). If the
initial screen (the login
screen) does not appear,
contact your dealer.
You can see this
message when the
signal from the video
card exceeds the
maximum resolution and
frequency that the
monitor can properly
handle. Adjust the
maximum resolution and
frequency that the
monitor can properly
handle.
The monitor is in Power
Saver mode.
Press a key on the
keyboard or move the
mouse to activate the
monitor and restore the
image on the screen.
User’s Manual
9