User’s Guide XV1- 32” , 40” ,46” LCD-TV European Version V.
USER GUIDE Introduction Thank you for buying SWEDX XV1-xx LCD-TV. Please read this manual thoroughly before operating the TV. Make sure the display was not damaged in transit. Should the TV be damaged, please contact your dealer and do not install it. Check that you have all the accessories according to the model. Safety precaution • • • • • • • • • • • • • Do not place the TV on unstable places, from which it may fell off. Do not expose the TV to extreme temperature and humid environment.
USER GUIDE Basic operation • Use AC 100--240V 50-60 Hz power outlet for the TV power supply. • lf the screen of TV is not on, please press the power button on the remote control or on the TV. • lf you want to shut off the TV temporary, please press the power button on the remote control or on the TV. • lf you want to shut off the TV completely, please switch off the power ON/OFF. • In TV/AV state, the TV will enter idle state if there is no signal input within 15 minutes.
USER GUIDE Contents XV1-32**-*** MUTE ARC SLEEP PSM STILL POWER DUAL I-II PR+ 8 5 2 9 6 3 PIP SSM INFO. SOURCE P.INPUT VOL+ TV P.SIZE P.POSITION EXIT Scart S.SELE CT PRE/CH 1 0 7 HDMI PR- ENTER 4 MENU -/-- PC Component VOL- BLUE HOLD PIP PR- PIP PR+ REVEAL SIZE TIME PG UP YELLOW MIX POWER PR+ PSM 8 5 2 9 6 3 S.SELE CT SOURCE PIP SSM INFO. P.INPUT VOL+ TV P.SIZE P.
USER GUIDE Specification Display XV1-32 Aspect Ratio Resolution Brightness (cd/m2) Contrast Maximum Rate Viewing Angle(U/D/L/R) Response Time(ms) Analog PC XV1-46 CVBS, S-Video Component TV Connections TV (Video) Digital TV Component1 Digital TV Component2 Av1 Av2 / Av3 S-Video PC Analog HDMI 16:9 16:9 16:9 1366x768 1366x768 1366x768 500 500 500 1200:1 1200:1 1200:1 100 MHz 100 MHz 100 MHz 90/90/90/90 90/90/90/90 90/90/90/90 8 ms 8 ms 8 ms H Frequency Range: 20 - 82 kHz V Frequency Range: 55 - 90 Hz Max
USER GUIDE Control buttons ON / OFF SOURCE SELECT VOL EXIT 1 1. Source/Exit: 2. Vol: 3. 4. 5. 6. 7. LED: ON / OFF: IR: CH: Select/Menu: VOL CH 3 4 5 2 CH 6 MENU 7 Choose the input source / Exit the OSD menu Decrease and increase the audio volume / Navigate the OSD menu Power indicator Power switch Remote control receiver Zap the channels / Navigate the OSD menu Select in the OSD menu / Activate the OSD menu.
USER GUIDE Remote Control Key Name Operation Power Key §Power on / off §Activates main OSD when no main OSD activated §Navigates parent menu when main OSD activated §Stops auto frequency search §Activates source select OSD when no main menu activated. §Changes input source that selected by source select navigation §Executes function by OSD help commands when main OSD activated §Activates child menu when child menu exists. §Increases program number & tune channel when no OSD activated.
USER GUIDE Remote Control Key Name Operation Info Sleep Time §Displays input source information §Displays current sleep timer value by minute when no sleep timer OSD activated §Setup minimum sleep timer value more than current sleep timer value when sleep timer OSD activated. §If sleep timer is maximum value, disables sleep timer. §Toggles speaker/headphone sound mute status.. §Activates source change OSD when source change OSD is not activated.
USER GUIDE Teletext function TXT/CC: Press TXT/CC to enter teletext state and display teletext page. If want to display image and teletext page at the same time, press this button again. If want to exit teletext state, press this button again. When teletext page is displayed on the screen, you can select relevant function by using the remote control. SUBPAGE: is refer to the subpage of teletext page, i.e. subcode page. When it is pressed, the screen display the requirement of subpage code entry.
USER GUIDE OSD Menu Structure §OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. §Press the MENU/ENTER button on the remote control to see the main OSD menu. Example of OSD Menu: §Main Menu: Press the MENU/ENTER button on the remote control to enter the main OSD menu. First, select Main menu item you need with CH+ & CH- button. To select a main menu items, just press VOL+ or MENU/Enter button on the Remote Control.
USER GUIDE PIP menu Use same navigation way as in the picture menu to navigate the pip menu. OSD USER FUNCTIONS FOR PIP MENU Window Sound source MAIN Sound source PIP Main source See function note PIP source See function note PIP size Small Medium Larg PIP position PIP mode OFF, PIP, POP, 9WIN PIP swap Swap PIP to Main 3D NR OFF, LOW, MID, HIGH 3D NR is available only in TV mode (PIP off).
USER GUIDE TV MENU Use same navigation way as in the picture menu to navigate the TV menu. OSD USER FUNCTIONS FOR TV MENU Auto Tune Manual Tune Fine Tune Chanal Swap Skip ON/OFF Color System AUTO PAL SECAM Sound System AUTO D/K B/G I L Nicam Mono In order to receive TV program, signal should be receivedfrom one of the following signal sources: • Outdoor antenna. • Cable TV network • Satellite broadcast network 1.
USER GUIDE Wall mode Hole X Drill the holes. The distance between the holes centers is given below according the model. Install the plug, part A and the screws according to the drawing to the right. Install the Parts A according to the drawing above. Install the screws A on the rear of the LCD-TV. A 799 mm It is strongly recommended that you connect all connections cables before hanging the LCD-TV on the wall. Hang the LCD-TV on the installed Parts A.
USER GUIDE Troubleshooting Before contacting SWEDX service or your dealer, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer. No sound or picture Check that the mains lead has been connected to a wall socket. Check that you have pressed the POWER button on the front of the TV. Check the picture contrast and brightness settings. Check the volume.
USER GUIDE What the warranty covers: SWEDX warrants your SWEDX display(s) against defects in material and workmanship during the warranty period from SWEDX factory delivery date shown in the shipping documents. If a product proves to be defective in material or workmanship during the warranty period, SWEDX will, at its sole option repair or replace the product with a similar product, provided the purchaser adheres to certain return authorization procedures and guidelines.
USER GUIDE 2. If the contact is made with SWEDX Customer Service, SWEDX will contact the customer upon receipt of the RMA Request Form and issue a RMA number within normally 48 hours, and give the customer further instructions. SWEDX technical support services: During the period of product warranty, we support your basic configuration, setup and troubleshooting questions, and when required, we provide you with all instructions on how to return your product for repair.
