Operation Manual

Basic operation

Preparation

• Put the TV on a stable surface.

• Do not fix the TV with others fixations than those provided or suggested by the manufacturer.

• If you have a wall mount, check that it is steady.

• Do not place any material on the TV.

• Do not block or cover the ventilation openings on the TV.

• The TV must be plugged with a tension source of 110-240 volts and 50 Hz.

• Power cord and cables must be properly routed and protected to prevent people from

stepping on them and causing the TV to fall.

• Keep the power cord away from any heat source. Possible fire hazard.

Heating sources and humidity

• Keep the TV dry and away from humidity.

• Keep the TV away from heat sources.

Cleaning and maintenance

• Unplug the TV before cleaning it. Do not use solvents or liquids to clean the TV.

• Only clean the TV with a soft and dry cloth.

• In case of troubleshooting, do not use spare parts other than those suggested by the

manufacturer. Using inadequate spare parts can lead to electric shocks, short-circuits fire or

others incidents. Please contact a technical authorized by SWEDX brand.

Departure in holidays

• Unplug the LCD-TV during lightning storms or when unused for long periods of time.

• Use AC 100--240V 50-60 Hz power outlet for the TV power supply.

• lf the screen of TV is not on, please press the power button on the remote control or on the

TV.

• lf you want to shut off the TV temporary, please press the power button on the remote control

or on the TV.

• lf you want to shut off the TV completely, please switch off the power ON/OFF.

• In TV/AV state, the TV will enter idle state if there is no signal input within 15 minutes.

• ln PC state, the TV will enter idle state if there is no signal input within 2 minutes.

• The setting and tuning of picture and sound will be saved when the TV is shut off, which will

be working in the pre-shut off state when the TV is turn on again.

• lf PC signal source is used, please first set the resolution of the PC display card as the

following modes: (1024*768 60 Hz, 800*600 60 Hz, 640*480 60 Hz)

• lf there is line-by-line output of the signal used by the user, signal source with line-by-line

output is recommended.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

USER GUIDE

“Design and specifications are subject to change without notice”