Installation guide

12
Advanced setup
Advanced setup can be done when you know exactly which settings your ISP requires or when the simple setup fails.
There are 4 possible configurations. We have listed them with instructions on how to configure them. To know which setting matches the
settings required by your ISP, look at the list of providers further on in this manual. The list is made out of ISP’s and their corresponding services.
Behind each service is listed the required setting.
Note: If any of the settings below do not work immediately, it is recommended to power down your modem, wait a few minutes and then
connect the power to your modem again.
Logging in to the router:
For advanced setup, it is required that you login to the router to manually configure it correctly for your internet connection. To log in to the
router, start Internet Explorer, empty the address bar and enter: http://192.168.32.1/, then press Enter. The following window should appear:
Enter “sweex” as user name and “mysweex” as password, then click OK. If you are unable to login, please refer to the troubleshooting section
of this manual.
The following screen should appear. Click “Next” to start the advanced setup. If
you
see a different screen, click “Quick Setup” in the menu
on the left:
English version