manual

ManualsBrandsSweex Manualselectrical equipment & suppliesUPS 1200 VA

English version

PP121 Sweex Manageable UPS 1200VA USB 2.0 with LED status

Introduction

• Do not expose the Sweex Manageable UPS to extreme temperatures. Do not place the device in direct sun light or close to

heating elements.

• Do not use the Sweex Manageable UPS in extremely dusty or moist environments.

• Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics.

• Never try to open the device yourself, this voids the warranty.

Hardware Installation

1. Make sure that the computer you are going to connect to the UPS is turned off.

2. Connect the power supply of the computer with the power output of the Sweex Manageable UPS

3. Put the plug of the UPS in the plug socket

4. Turn on the UPS by pressing the On/Off button on the device.

5. Turn the PC back on.

Pay attention:

• Connect the USB cable after the software is installed.

• The Sweex Manageable UPS is designed to secure computer systems. Connecting other electronic devices is not recommended

and entirely at your own risk.

• The UPS has to be charged for eight hours to be able to supply the entire back-up capacity.

• The amount of time the Sweex Manageable UPS can supply power to the connected devices after a power failure is always

dependant on the load connected to the UPS.

Summary of content (4 pages)

PAGE 1
English version PP121 Sweex Manageable UPS 1200VA USB 2.0 with LED status Introduction • Do not expose the Sweex Manageable UPS to extreme temperatures. Do not place the device in direct sun light or close to heating elements. • Do not use the Sweex Manageable UPS in extremely dusty or moist environments. • Prevent hard shocks or impacts of the device, as this can cause damage to the internal electronics. • Never try to open the device yourself, this voids the warranty. Hardware Installation 1. 2. 3. 4.
PAGE 2
English version LED's and Buttons There are 3 LED's on the front side of the Sweex Manageable UPS and one button. 1. Blue LED indicates that the mains voltage is OK. 2. Orange LED indicates that the UPS is charging. 3. Red LED indicates that there is a power failure. The UPS will now supply power to all connected devices. 4. On/Off button. Software installation 1. Place the Sweex CD-ROM in the CD-ROM tray. A menu will appear automatically. Click “Drivers and Software”.
PAGE 3
English version Charging the Sweex Manageable UPS The UPS is being charged from the moment it is plugged in the plug socket. The orange LED will light up. The UPS is also charging up when it is turned on with the button. Configuring the Sweex Manageable UPS By using the PowerManagerLite you can configure the UPS. At the bottom right of your screen you will find the PowerManagerLite icon, use this to start the manager.
PAGE 4
English version Warranty For most Sweex products a warranty period of 3 years applies. On Graphics Cards and Consumer Electronics Sweex offers 2 years of warranty. We do not give support or warranty on supplied software, rechargeable batteries and batteries. Transaction of warranty only takes place at the sales point where the product is bought. All brand names and associated rights mentioned in this manual are and stay property of the rightful owner.