manual

ManualsBrandsSweex Manualscomputer componentsWireless 150N Nano Adapter USB

ENglISH VErSIoN

LW154 Wireless 150N Nano Adapter USB

Please notice! On the included CD-ROM you will find the Setup Wizard. This easy install procedure will show you how

to setup the adapter step-by-step.

• DonotexposetheWireless150NNanoAdapterUSBtoextremetemperatures.Donotplacethedeviceindirectsunlightorinthedirectvicinity

ofheatingelements.

• DonotusetheWireless150NNanoAdapterUSBinextremelymoistordustysurroundings.

• Protectthedeviceagainstpowerfulshocksandfalls–theymaydamagetheinternalelectronics.

• Neverattempttoopenthedeviceyourself,therearenoserviceablepartsinside.Openingthedevicewillcausethewarrantytolapse.

Package contents

In this package you will find:

• Wireless150NNanoAdapterUSB

• CDwithdriver,softwareandthismanual

Ifyoufindthatanyofthepackagecontentsaremissing,pleasereturnthepackagetothesalespointwhereitwasbought.

Terminology list

This manual will contain a number of technical terms. It is important to know what they mean before you begin

installing and configuring the adapter.

• Adapter:ThisistheWireless150NNanoAdapterUSB,theproductyouhavejustbought.

• Wirelessnetwork:WirelessnetworksarebasedontheWi-Fistandard.TheadapterenablesyoutoconnecttoWi-Finetworksataspeedofupto

150Mbps,providedthatthenetworksupportsthisspeed(orhigher)

• (wireless)Adapter,modem,accesspoint:Thesearedevices(amongstothers)cantransmitawirelessnetworksignal.

• Wirelesssecurity:Wirelesssecurityisaformofprotectionforwirelessnetworksthatallowsonlyauthorizeddevicesaccesstothenetworkand

preventseavesdropping.Thereareseveraldifferentformsofwirelesssecurity,asisexplainedfurtheroninthismanual.

Installation Windows XP, Vista and 7

PlacetheSweexCDintheCDplayer,click“DriversandSoftware”andfollowtheinstructionsonscreen.

Summary of content (16 pages)

PAGE 1
English version LW154 Wireless 150N Nano Adapter USB Please notice! On the included CD-ROM you will find the Setup Wizard. This easy install procedure will show you how to setup the adapter step-by-step. • Do not expose the Wireless 150N Nano Adapter USB to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of heating elements. • Do not use the Wireless 150N Nano Adapter USB in extremely moist or dusty surroundings.
PAGE 2
English version Setting up the wireless network How does it work? To create a wireless network you need a wireless adapter, wireless modem or Wi-Fi access point. The wireless adapter, modem or access point distributes the wireless network. The name of this network, also called the SSID, is dependant on your wireless adapter, modem or access point and is different per type or brand. You can often change the name, so you can easily identify your own wireless network.
PAGE 3
English version The Sweex Utility will appear. Click on the “WPS Setting” tab, you should see the following screen: To connect to a WPS secured network, first click the “Push Button Config (PBC)” button, then push the WPS button on your router. The utility will automatically find your network and establish a WPS secured connction to it. After a WPS conection has been successfully established, you will see it in the “Profile” tab.
PAGE 4
English version Windows XP with Sweex Utility: Right-click on the “Sweex Wireless Utility” icon at the bottom right of your screen and click “Open Utility”.
PAGE 5
English version Windows 7: Windows 7 will indicate when wireless networks are available. You can recognise this by the following icon in the bottom-right of your screen: Note: If you see a small red cross through the icon, no networks are in range of your computer. Please consult the troubleshooting section of this manual if this is the case.
PAGE 6
English version Windows XP 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 I n the control panel, click “Network and Internet Connections and open the “Network Connections” icon. If your control panel is in Classic View, you may open the “Network Connections” icon straightaway. 3 R ight click the first connected LAN or High-Speed Internet Connection, in this example the “Local Area Connection”, and click “Properties” from the context menu.
PAGE 7
English version 4 T he connection’s property window appears. In this windows, select the “Internet Protocol” from the list of items and click the “Properties” Button: 5 The Internet Protocol’s property window appears. In this window, ensure that both settings are set to “Obtain automatically”: 6 Confirm the settings by clicking “OK”. The network settings for XP are now properly configured for your adapter.
PAGE 8
English version Windows Vista 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 In the Control Panel, click “View network status and tasks”. If your Control Panel is in classic view, open the “Network and Sharing Center” icon: 3 T he Network and Sharing Center window should now open.
PAGE 9
English version 4 R ight click the first connected LAN or High-Speed Internet Connection, in this example the “Local Area Connection”, and click “Properties” from the context menu. If you have multiple connected connections, repeat steps 4 to 7 for each connection: 5 T he connection’s property window appears. In this windows, select the “Internet Protocol Version 4” from the list of items and click the “Properties” Button: 6 The Internet Protocol Version 4’s property window appears.
PAGE 10
English version Windows 7 1 Click the start button at the bottom right of your screen and click “Control Panel” 2 In the Control Panel, click “View network status and tasks”. If your Control Panel is in icon view, open the “Network and Sharing Center” icon: 3 T he Network and Sharing Center window should now open.
PAGE 11
English version 4 R ight click the first connected connection, in this example the “Local Area Connection”, and click “Properties” from the context menu. If you have multiple connected connections, repeat steps 4 to 7 for each connection: 5 T he connection’s property window appears. In this windows, select the “Internet Protocol Version 4” from the list of items and click the “Properties” Button: 6 The Internet Protocol Version 4’s property window appears.
PAGE 12
English version • I appear to be connected but Internet Explorer still displays an error message “Internet Explorer cannot display the webpage” or similar. • This problem may arise from incorrect proxy server settings. You can adjust these settings as follows: 1 In Internet Explorer, click the “Tools” menu or icon and chose “Internet Options”. 2 3 T he “Internet Options” window will now open. In this window, click the “Connections” tab and in this tab, the “LAN Settings” button.
PAGE 13
English version • I have Windows Vista and I get the error message “the settings saved on this computer for the network do not match the requirements of the network” when I try to connect. wirelessly. • This problem can be solved as follows: 1 In the Control Panel, click “View network status and tasks”. If your Control Panel is in classic view, open the “Network and Sharing Center” icon: 2 T he Network and Sharing Center window should now open.
PAGE 14
English version • I have Windows 7 and I cannot connect to my wireless network.
PAGE 15
English version 16
PAGE 16
English version 17