User's Manual

Remote Controller Pairing

Always pair the remote controller and then select the FPV channel to match the best channels and

avoid interference.

DescriptionRemote Control Operation

FPV Channel Adjust

FPV Chennel Button

DescriptionRemote Control Operation

1. To pair the remote controller to the drone, hold the Return

Home switch down and simultaneously power on the

remote controller.

2. The remote controller will vibrate and beep twice. The

Controller Status Light will flash red and green.

3. Power on the drone. After pairing has completed, the

Controller Status Light will turn green.

4. Long-press the FPV channel button. The FPV screen will

display “RF SEARCHING” and automatically find the best

FPV channel.

There are 8 FPV channels available. Long-press the FPV channel button

(CH) and the system will automatically search for channels.

DescriptionRemote Control Operation

Camera Gimbal Control

Camera up Camera down

Camera up: Tilt camera up

Camera down: Tilt camera down

In the absence of obstacles and interference the ﬂight height can reach >80m and FPV

transmission range can reach 800m. For best reception, keep the left-hand (2.4GHz)

antenna horizontal and the right-hand antenna (5.8GHZ) vertical.