User's Manual

©2019 SwellPro All Rights Reserved
07
GPS
80%
10
Automatic takeoff
Phone location
Return home
(return to the
remote controller)
Hover
Attitude meter
Flight path
disconnected
Connection status
Point to fly
Drone information
Flight mode GPS signal
Remote control signal
Battery capacity
Photo/Video
mode
Shutter
Horizontal distance
Vertical distance
Ascent/descent speed
Flight speed
Coordinate information
10 10
-10 -10
0
I
I
I
I
I
I
I
I
I
D: 0.0m H: 0.0m H.S: 0.0m/s V.S: 0.0m/s
Lat：113.860667 Ing：22.704291
APP Control
How to Use
The Spry remote controller has a built-in WI-FI module that can be used to connect your mobile device and
control the aircraft to perform various intelligent automatic flight modes with the Spry APP.
APP installation:
The Spry app is available for iOS and Andoid devices. Android systems can download the
APK from either the Android market or our website www.swellpro.com.
To connect the app to the Spry’s remote controller, power on the remote controller and drone, then connect
your mobile device to the WiFi hotspot called SP_FF1.....
After successfully connecting, open the APP to display realtime data from the drone such as voltage,
coordinates, altitude, distance, GPS signal and other flight parameters.
When ying indoors or in enclosed spaces, the lack of a strong GPS signal will aect the
positioning stability of the aircraft. Do not use the APP to control the aircraft at this time.
If the aircraft is lost due to improper operation or malfunction, you can use the APP to locate the
last coordinates to retrieve the aircraft. The Remote Control must be turned on to use the APP.