User Guide

II. Parts of the microscope

III. Assembly and set up

Carefully remove the microscope from the box and set it on a sturdy, flat surface.

Remove the plastic cover from the eyepiece holder on the microscope's head, then

place an eyepiece into the holder. Locate the power adapter and attach it to the

microscope, then plug it in. Turn the microscope on by pressing the power button.

IV. Using the microscope

Turn the microscope on and choose the lower lamp setting. Use the illumination

intensity control dimming handwheel to set the lamp on the lowest brightness setting.

Secure a slide via the slide clips on the stage.