2999-18 - NOTICE This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information Call our toll-free number: 1-866-890-2211 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST or email: customerservice@backyard-play.
(This page intentionally left blank.
2999-18 Backyard Play Systems Customer Service 1-866-890-2211 1000 Ternes Drive Monroe, MI 48162 Tools Required Recommended for Ages 3 to 11 BEFORE YOU YOU BEGIN BEGIN --- BEFORE First... Adult Assistance required Squareness is very Important! Hammer Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
ASSEMBLY SAFETY and HELPFUL HINTS STOP!!! Check all parts and hardware before beginning. If any parts are missing or damaged please circle and call the phone number listed. DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET ! KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE AND MAINTENANCE REFERENCE. To aid in making your playset assembly easier, here is a listing of some helpful hints. Wear safety glasses during drilling, assembly of your playset.
SAFETY WARNINGS Please read carefully. Observing the following statements and warnings reduces the likelihood of serious or fatal injury. This playset has been designed for use by a maximum of 12 occupants at one time having a combined weight of 1,260 pounds. (This weight does not include occupants in the sandbox area.) This playset is recommended for children (3) through (11) years of age. On-site adult supervision for children of all ages is recommended.
MAINTENANCE Periodic maintenance is required to ensure safe enjoyment of your playset and optional accessories. Observing the following procedures reduces the likelihood of serious or fatal injury. Activity on your playset and optional accessories may loosen fasteners. Check all lock nuts, hex and lag bolts, quick clips, spring clips, acorn nuts, wood screws, and swing hangers for tightness and tighten as required. T-nuts should be inspected for full and proper seating into the wood.
PLAYGROUND SURFACING MATERIALS SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK9 Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM Specification F 1292.
PLAYSET ORIENTATION *Hint* Throughout this manual references made to the Left Side, the Right Side, the Front Side and the Back Side of the playset serve as a consistent reminder to help with assembly.
IMPORTANT! Use these Assembly Procedure Hints throughout the installation process. 1. All Lag Bolts must have pre-drilled holes. Use a 1/4” drill bit for all 3/8” Lag Bolts. Use a 3/16” drill bit for all 5/16” Lag Bolts. Pre-drilling pilot holes will help prevent Screws and Lag Bolts from breaking and wood from splitting during assembly. DO NOT OVER-TIGHTEN LAG BOLTS 2. In areas where drilling a larger 1/2” hole is neccessary, such as when installing T-Nuts, (Fig.
W O O D PA R T S L I S T 3/4 x 3-3/8 x 45-1/8" 2968-CC x1 1 x 3-3/8 x 47-1/8" 1 x 3-3/8 x 45-1/8" 1-3/8 x 3-3/8 x 18" 2899-CC x6 3/4 x 2-1/2 x 45" 1-3/8 x 3-3/8 x 51" 2970-CC x4 3/4 x 5-3/8 x 23-3/4" 2521-CC x1 1-3/8 x 3-3/8 x 51" 2971-CC x1 3/4 x 3-3/8 x 47-1/8" 2972-CC x2 3/4 x 5-1/2 x 44-7/8" 2961-CC x7 1-3/8 x 3-3/8 x 47-3/4" 2974-CC x1 3/4 x 5-3/8 x 23-3/4" 2960-CC x2 3 x 3 x 95" 2522-CC x1 2523-CC x16 1 x 5-1/2 x 45-1/8" 2966-CC x1 3 x 3 x 45-1/8" 3 x 3 x 95" 2525-CC x2 296
Swing Beam 90o Plate 2485 x1 2412 x2 Swing Beam Angled Plate Left Swing Beam Angled Plate Right L-Bracket 2449 x1 2448 x1 Swing Beam Flat Plate Swing Hanger 2447 x1 Anchor Stake H A R D W A R E 90o Angle Bracket Plate 2631-B x6 2411 Trapeze WS 4521 x4 Safety Warning Plate Climbing Rocks WS 4885 x2 WS 1501 x1 Rope x4 SA 4294 x1 Plaque WS 4545 x6 Safety Handle S O R I E S Swing x1 E S IN BAG x4 C SA 4220 x1 WS 4410 x3 Steering Wheel A C Telescope SA 3097 x
3/8" LOCK NUT 3/8" x19 3/8" x10 2-1/2" PAN HEAD SCREW 3/8" T - NUT x28 x20 3/8" FLAT WASHER 1/4" LOCK WASHER x48 1/4" x4 3/8" 5/16" T - NUT 3/16" x 1" FENDER WASHER S T E N E R S TRUSS HEAD SCREW 3/4" 3/8" LOCK WASHER x4 2-1/2" x4 Y L A x4 5/16" P 5/16" 1-3/4" PAN HEAD SCREW 1-3/4" x8 1/4" ROCK WALL HARDWARE 1-1/2" Lock Washer x12 Hex Bolt 10 1" 5/16" FLAT WASHER 5/16" LOCK WASHER S E T F A x4 x10 Flat Washer T - Nut
3/8” HEX HEAD BOLTS x2 x4 x1 1-1/4" 1" 2" x8 3/8" 3-3/4" 3/8" LAG BOLT 3/8" 3/8" LAG BOLT L 5" P x4 3/8" A Y S T F 3" x2 E 3/8" x1 A 4" S T E 3/8" N WOOD SCREWS E x195 x12 2" 2-1/2" 3" 11 S x12 R x95 30 mm
x2 x6 x2 3-3/4" 3" x2 4-1/2" x2 6" x1 6-1/2" 8-1/2" 3/8" 3/8" HEAD BOLTS ” 3/8" 1-3/4” 2” 2-1/4” 3/8" 3/8” BUTTON HD. 3/8” SCREW 3/8" 3/8” BUTTON HD. SCREWHD.
C L U B H O U S E PA R T S L I S T 3/4 x 3-3/8 x 19-1/4" 3/4 x 3 x 6-15/16" 1814-CC x4 1806-CC x1 3/4 x 3 x 10-5/16" 1807-CC x1 1811-CC x2 5/16 x 2-15/16 x 16-13/16" 2852-CC x2 2864-CC x2 5/8 x 4-7/8 x 29-3/4" 2853-CC x5 P 5/8 x 3/1/4 x 12-7/16" A R 5/8 x 1-7/8 x 12-7/16" T S 5/8 x 3-1/4 x 5" E 1809-CC x2 3/4 x 3-3/8 x 45-1/8" 2855-CC x8 1812-CC x2 O 1-3/8 x 3-3/8 x 51" 5/8 x 3-1/4 x 9-1/2" 1826-CC x1 B 1813-CC x9 1808-CC x2 C H 5/8 x 3-1/4 x 17" U S 5/8 x 3-1/4 x 14-3/4" L
C L U B H O U S E H A R D WA R E 3/8” BUTTON HD. SCREWHD. BUTTON 3/8” BUTTON HD.
PLAYSET SET-UP SAFETY AREA BACK SIDE 6' SAFETY AREA 10'- 8" HEIGHT ROCK WALL TERRACE SWINGS 13'- 4" SLIDE LADDER 16'- 6" MONKEY BARS FRONT SIDE 6' SAFETY AREA 28'- 6" (This space intentionally left blank.
FORT CORNER POSTS 2-1/2" Wood Screw 2953-CC Note hole location. x2 3" Lag Bolt Lock Washer Flat Washer Flush x2 3-3/4" Hex Bolt Lock Washer x2 Flat Washer Hole for Climbing Rope 2968-CC x1 Flush 3/4 x 3-3/8 x 45-1/8" 47-1/4" 12-5/8" Flush 2899-CC x1 90° T-Nut x2 1 x 3-3/8 x 45-1/8" 3 x 3 x 95" 2954-CC x1 79-1/4" 2953-CC x1 3 x 3 x 95" Align braces with pre-drilled holes. Ensure all bracing is square before installing wood screws.
FORT FRAME BRACING 3/4 x 3-3/8 x 45-1/8" 2973-CC x1 Note hole location. Ensure all bracing is square before installing wood screws. 1 x 3-3/8 x 45-1/8" x4 2899-CC 2-1/2" Wood Screw x10 3/4 x 5-3/8 x 45-1/8" Flush Flat Washer Lock Nut x2 Flat Washer x4 2969-CC x1 Flush 5" Hex Bolt x2 x1 2969-CC Align braces with pre-drilled holes. BOTTOM 3/4 x 5-3/8 x 45-1/8" FORT FRAME BRACING 2-1/2" Wood Screw x2 3-3/4" Hex Bolt Lock Washer Flat Washer 47-1/4" x4 Note hole location.
BOTTOM FRAME BRACE FORT FLIP ASSEMBLY OVER TO INSTALL BOTTOM BRACE. x6 2-1/2" Wood Screw 90° Flush 3/4 x 5-3/8 x 45-1/8" 2969-CC x1 Align brace with pre-drilled holes. Ensure all bracing is square before installing wood screws. Flush FORT Align braces with pre-drilled holes. CONNECT FRAME SECTIONS ENSURE THESE HOLES ARE ON THIS SIDE.
FORT DECK CLEAT 3/4 x 2-1/2 x 45" EQUA x1 2516-CC L EQUA L EQUA L EQUA L Flush 2-1/2" Wood Screws x4 Flush To avoid splitting wood pre-drill (2) 11/64" holes 3/8" FORT DECK PLANKS Flush with post.
FORT DECK PLANKS 3/4 x 3 x 38-7/8" 2962-CC x2 x8 2-1/2" Wood Screws Flush along outer edge 30 mm Wood Screws x4 FORT DECK SUPPORT x8 1-3/8 x 3-3/8 x 18" x4 2970-CC 2" Wood Screws (2" screws into deck frame) 2" Wood Screws from inside Flush to inside of 3x3 3" Wood Screws x8 (3" screws into 3x3 posts) Flush 2" Wood Screws 3" Wood Screws Look for pre drills 20
FORT SWING BEAM SUPPORT 6" Carriage Bolt x2 Torque Washer Small Holes UP Flat Washer 6" Carriage Bolt Lock Nut 2505-CC x1 SET ON RAIL 3 x 3 x 45-1/8" Flat Washer x2 Torque Washer Lock Nut FORT BALUSTER SUPPORTS Part 1814-CC is used in several applications. Do not use the holes on the right side.
FORT BALUSTER SUPPORT Part 1814-CC is used in several applications. Do not use the holes on the left side. Note this rope-hole location 1814-CC Pre-Drill 1/8" hole 3/8" up from lower edge of 1814-CC. SWING BEAM SUPPORT 3/4 x 3-3/8 x 19-1/4" x1 1814-CC 3/8" Flush x1 2" Wood Screw LEFT SIDE Bottom rests flush on lower brace.
AUX.
ROCK WALL ASSEMBLE Rail (1826-CC) may have full or partiallly pre-drilled holes. Align screws with the pre-drilled holes in rails (1826-CC). 1-3/8 x 3-3/8 x 51" 1826-CC x2 23-3/4" 3/4 x 5-3/8 x 23-3/4" Outside Dimension 2960-CC x1 Flush 2-1/2" Wood Screws x4 5-1/4" 23-3/4" 5-1/4" Outside Dimension Flush ROCK WALL ASSEMBLE Place planks onto rails (1826-CC) as shown. If rails are fully pre-drilled, align all planks and screws with pre-drills.
ROCK WALL ROCKS Install rocks at pre-drilled hole locations. 1/4" x 1-1/2" Hex Bolts 1/4" Lock Washers 1/4" Flat Washers WS 4545 x3 BAG T-Nuts Do NOT attach top board at this time.
ROCK WALL INSTALL Mark (2) bracket holes. 3-3/4" Mark FRONT SIDE ROCK WALL INSTALL Pre-drill two 1/4" pilot holes at marked locations. Re-drill holes from opposite side using 3/8" bit.
ROCK WALL INSTALL FRONT SIDE Rock Wall 5/16" T-Nut x2 ROCK WALL INSTALL 5/16" Flat Washer 5/16" Lock Washer 5/16" x 1-1/4" Button Head Screw x2 BEGIN HERE 2-1/2" Wood Screws x2 3/4 x 3-3/8 x 27" 2967-CC x1 2-1/2" Wood Screws x2 2" Wood Screws x2 27
INSTALL ANGLE BRACE Pre drill 3/16" pilot hole 2" deep for 4" lag bolt.
ASSEMBLE STEP LADDER 1/2" From Angle 2-1/2" Wood screws x4 x1 2965-CC 3/4 x 3-3/8 x 17" ASSEMBLE STEP LADDER 5/16" Flat Washer 5/16" Lock Washer 5/16 x 1-1/2" Button Head Screw 29 x2 5/16" T-Nut 5/16" L-Bracket
INSTALL STEP LADDER Flush Flush 4-3/4" Mark Bracket Hole Locations. Flush Ladder Rail BACK SIDE INSTALL STEP LADDER SEE PAGE 7 Pre-drill two 1/4" pilot holes at marked locations. Re-drill holes from opposite side using 3/8" bit.
INSTALL STEP LADDER BACK SIDE Ladder 5/16" T-Nut x2 INSTALL STEP LADDER 5/16" Flat Washer 5/16" Lock Washer 5/16" x 1-1/4" Button Head Screw x2 31
SWING BEAM SWING HANGERS - INSTALL Swing Beam Flat Washer Swing Hanger Bolt Swing Hanger Flat Washer IMPORTANT! Final position of each Spring Clip is perpendicular to swing beam. 2631 Swing Hanger x6 Spring Clip You may need to tap with hammer to get though holes. SWING BEAM 3-3/8 x 5-3/ x 95" 2502-CC x1 SWING HANGERS Swing Hanger Bolt must protrude at least TWO Threads beyond Lock Nut. IMPORTANT! 2 Threads MIN.
UPRIGHT INSTALL Center 2977-CC. Mark and Pre drill 7/16" through holes for hex bolt. AL EQU x2 AL EQU T-Nut Flat Washer Lock Washer 30 mm Hex Bolt SWING BEAM SUPPORT 2505-CC 1 x 3-3/8 x 47" x1 2977-CC Flush A - FRAME ASSEMBLE T-Nut x2 2525-CC x2 3 x 3 x 95" Rotate 2525-CC 180o after installing T-Nuts.
A - FRAME ASSEMBLE 3-3/4" Hex Bolt x2 Lock Washer Flat Washer 2-1/2" Wood Screws x4 2978-CC x1 1 x 3-3/8 x 68-1/2" Pre-installed T-Nuts are underneath.
90o PLATE A - FRAME 2449 x1 x2 3-3/4" Carriage Bolt Lock Nut Flat Washer 2525-CC SWING BEAM ANGLED PLATES 3-3/8 x 5-3/8 x 95" DO NOT FULLY TIGHTEN CARRIAGE BOLTS AT THIS TIME 2502-CC x1 x2 Flat Washer Lock Nut x1 2448 4-1/2" Carriage Bolt x2 x1 NOTE: You may need to tap bolts with hammer to get though holes.
SWING BEAM ASSEMBLE Position swing beam assembly resting upon A-frame. SWING BEAM ASSEMBLE Align holes and insert carriage bolt. Repeat where arrows are shown. NOTE: You may need to tap bolts with hammer to get though holes.
SWING BEAM ASSEMBLE 6-1/2" Carriage Bolt Torque Washer You may need to tap with hammer to get though holes. Flat Washer Lock Nut SWING BEAM INSTALL Position swing beam assembly resting upon plate and align with holes. x1 8-1/2" Carriage Bolt x1 6-1/2" Carriage Bolt x1 Torque Washer 2485 Flat Washer x2 Lock Nut x1 NOTE: You may need to tap bolts with hammer to get though holes.
INSTALL SWING BEAM 1. Pre-drill using 3/16" bit. SEE PAGE 7 2. Re-drill from opposite side using 7/16" bit.
ASSEMBLE SWING BEAM 2-1/2" Pan Head Screw x2 1/4" Lock Washer BALUSTERS FORT 1" 1" 1" 1" 1" Install end-balusters first, 1" from upright.
ROCK WALL SIDE BALUSTERS FORT x2 1811-CC 5/8 x 4-7/8 x 29-3/4" x2 1809-CC 3x3" 5/8 x 3-1/4 x 29-3/4" Install end-baluster first: Flush tightly against fort 3x3" corner post. 30 mm Wood Screws x16 BEGIN HERE 5/8 x 3-1/4 x 9-1/2" x2 1810-CC VIEW Flush (ALL) Flush INSIDE VIEW WINDOW FORT x1 2990 Place window centered over opening and secure using 3/4" screws.
ACCESSORY NOTICE STOP! AT THIS TIME YOU WILL BUILD YOUR MONKEY BAR. REFER TO THE MANUAL IN MONKEY BAR KIT FOR ASSEMBLY. AFTER ASSEMBLY, CONTINUE ON TO NEXT PAGE FOR INSTALLATION.
MONKEY BAR INSTALL POSITION * USE CARE WHEN INSTALLING MONKEY BARS TERRACE SIDE SWING BEAM SIDE * TWO PEOPLE AND A STEP LADDER ARE RECOMMENDED FOR THIS STEP MONKEY BAR INSTALL - STEP 1 3x3 Flush at TOP *Hint – Clamp Monkey Bar Assembly in place while marking holes. LADDER Flush Mark two drill-holes. 42 Ensure inner side of Top Ladder Rail is flush with inside of 3x3 corner post.
MONKEY BAR INSTALL - STEP 2 Drill-Through 3/16" marked locations. Re-Drill through using 7/16" bit from inside fort. MONKEY BAR T-Nut INSTALL - STEP 3 Flush at TOP Flat Washer LockWasher x2 1" Hex Bolt Bolts must not protrude beyond T-Nut. Add flat washers as needed.
INSTALL ANCHOR STAKES Monkey Bar installation is complete after installing Anchor Stakes. Metal Straps 1/4 x 1-1/2" Lag Bolts x2 WS 4522 x2 Flat Washers Install on Bottom Rail. x2 x2 Instructions for anchoring your playset product to the ground. 1. Determine the final location of your playset product. 2.
LADDER SIDE BALUSTERS FORT 13/16" 13/16" 13/16" 13/16" 3 x 3" 30 mm Wood Screws MONKEY BAR WILL NOT BE SHOWN FOR BETTER CLARITY DURING ASSEMBLY. x16 INSTALLATION: FROM INSIDE FORT 5/8 x 3-1/4 x 29-3/4" BEGIN HERE 2523-CC x4 VIEW INSIDE VIEW Flush LADDER SIDE BALUSTERS FORT 1" TYP. 1" TYP.
BAY WINDOW FORT 2-1/2" Wood Screws x8 1 x 5-3/8 x 45-1/8" 1808-CC x2 Flush BAY WINDOW FORT 2" Wood Screws x4 Flush 3/4 x 3 x 10-5/16" 1807-CC x1 3/4 x 3 x 6-15/16" x1 1806-CC Flush 46
TERRACE NOTICE STOP! YOU WILL BUILD YOUR TERRACE AT THIS TIME. GO TO NEXT PAGE.
T E R R A C E PA R T S L I S T 5/8 x 3-1/4 x 29-3/4" 3/4 x 2-1/2 x 45-1/8" 2516-CC x1 2523-CC x10 1 x 3-3/8 x 45-1/8” 5/8 x 3-3/8 x 45-1/8" 1817-CC x3 5/8 x 5-3/8 x 38" 2873-CC x10 R 3/4 x 5-3/8 x 30-1/2" T E 1816-CC x1 3/4 x 5-3/8 x 30-1/2" 5/8 x 3-1/4 x 27-1/2" 1815-CC x1 R 1819-CC x6 A 1818-CC x2 3/4 x 3-3/8 x 45-1/2" 3/4 x 3-3/8 x 33-1/2" C E 1820-CC x2 5/8 x 3-1/4 x 32-3/4" 3/4 x 5-1/2 x 45-1/8" 1821-CC x5 P A SLIDE 1-3/8 x 3-3/8 x 17" 1822-CC x1 R 2879-CC x2 T Green Yello
H A R D WA R E PA R T S L I S T 3/8" HEX BOLT 3/8” LOCK WASHER 3/8” T - NUT x4 x2 3/8” 3/8" LOCK NUT 5" 3/8" HEX BOLT S x2 R 3/8" x2 x8 3/8” N E x2 2" T E 1/4" x 1" FENDER WASHER S A C T U A L S I Z E 3/8" 3/8" 1" x3 F A 3/8” FLAT WASHER WOOD SCREWS x115 1-3/16" 30 mm x40 x70 1-3/4" PAN HEAD SCREW 1-3/4" 2-1/2" x3 1-3/4" 49
FRAME ASSEMBLE Flush T-Nut 3/4 x 3-3/8 x 45-1/8" x2 1820-CC Flush x2 5/8 x 3-3/8 x 45-1/8" 1817-CC x2 Flush BOTTOM 90° Flush Note hole locations (2) 90° Flush T-Nut 27-1/2" x2 1823-CC 1-3/8 x 3-3/8 x 95" Flush 62-3/4" 90-1/2" Flush 1-3/4" Wood Screws x24 Ensure Frame is square before installing wood screws. Flush INSTALL BALUSTERS M O TT O B Space all Balusters 1/2" apart. End balusters 5/8" from frame uprights.
SIDE RAILS INSTALL 2" Hex Bolt x2 Lock Washer Flat Washer Flush 1-3/4" Wood Screws x8 5/8 x 3-3/8 x 45-1/8" 1817-CC x1 Flush Flush 90° 90° 1 x 3-3/8 x 45-1/8" 27-1/2" x1 1815-CC Flush 59-1/4" Ensure Side Rails are square before installing fasteners. SIDE RAILS INSTALL Flush 3/4 x 3-3/8 x 33-1/2" 2-1/2" Wood Screws 1821-CC x5 x10 Note hole pattern 90° Flush 90° Flush 90° 90° 59-1/4" Flush Flush Flush 51 Ensure Side Rails are square before installing wood screws.
TERRACE ASSEMBLE Ensure side rails are level before installing wood screws. Flush Flush Flush LEVE L Flush LEVEL Attach Terrace to playset tower frame. 2-1/2" Wood Screws x15 LEVE L Flush LEVEL 59-1/4" 59-1/4" RIGHT SIDE LEFT SIDE 28" Approx.
INSTALL DECK SUPPORT & BAR TOP 3/4 x 2-1/2 x 42-1/2" Pre-drill 1/8" holes to avoid splitting x1 1825-CC " 3/4 2-1/2" Wood Screws 15- x4 Flush to top of 2490-CC slide block Pre-drill 1/8" holes to avoid splitting C -C 90 24 1-3/4" Wood Screws x6 Screws into baluster top rails. 5/8 x 5-3/8 x 33" x1 1816-CC 2-1/2" Wood Screws x2 Top View INSTALL DECK PLANKS 30 mm Wood Screws x4 Ensure deck planks are flush with side rails before installing wood screws.
INSTALL DECK PLANKS 30 mm Wood Screws 2-1/2" Wood Screws x12 x24 3/4 x 5-3/8 x 30-1/2" x6 1819-CC Note hole location. End Screws: 2-1/2" (24) Middle Screws: 30 mm (12) Equally spaced End Screws: 2-1/2" Top View Ensure equal spacing of deck planks before installing wood screws.
BALUSTERS TERRACE Use a baluster as a spacer to ensure correct baluster placement. BEGIN MEASURING AT CENTER SPACER LEFT SIDE EQUAL EQUAL x6 2523-CC SPACER 5/8 x 3-1/4 x 29-3/4" SPACER SPACER x24 SPACER 30 mm Wood Screws SPACER 3-1/4" Flush Ensure balusters are spaced evenly before installing wood screws. ENTRY ARCH TERRACE 3/4 x 5-1/2 x 45-1/8" 2-1/2" Wood Screws 1822-CC x1 x6 Flush Install Entry Arch flush up against bottom of playset roof rail.
BALUSTER SUPPORTS FORT 2-1/2 Wood Screws Flush x4 3/4 x 3-3/8 x 12" 2975-CC x2 Flush SAFETY BARRIER FORT VIEW FROM UNDER TERRACE LEVEL EQUAL EQUAL Flush 2973-CC x1 2-1/2" Wood Screws x4 3/4 x 3-3/8 x 45-1/8" INSTALLATION: UNDER TERRACE 56
BALUSTERS FORT 2-1/2" INSTALLATION: FROM INSIDE FORT 2-1/2" VIEW FROM INSIDE FORT 30 mm Wood Screws VIEW 5/8 x 3-1/4 x 29-3/4" x16 Flush 2523-CC x4 Flush BEGIN HERE BEGIN HERE 3x3" 3x3" Flush BAY WINDOW FORT 30 mm Wood Screws Flush at top x16 Flush at top Flush 5/8 x 3-1/4 x 12-7/16" 2853-CC x4 BEGIN HERE Flush at corner.
BAY WINDOW FORT EQUAL EQUAL Flush 5/8 x 3-1/4 x 12-7/16" Flush 5/8 x 1-7/8 x 12-7/16" x1 2853-CC x2 2852-CC 30 mm Wood Screws x8 OUTSIDE VIEW Flush BAY WINDOW FORT x8 5/8 x 3-1/4 x 12-7/16" 30 mm Wood Screws 2855-CC x4 Flush OUTSIDE VIEW Flush 58 Flush
BAY WINDOW FORT SIDE VIEW EQUAL x20 #8 x 3/4" Flat Head Phillips Screws 2855-CC PF2990 x2 EQUAL EQUAL EQUAL OUTSIDE VIEW SWING BEAM SIDE WINDOWS FORT 5/8 x 3-1/4 x 14-3/4" 5/8 x 2-15/16 x 16-13/16" 2855-CC x4 2864-CC x2 30 mm Wood Screws x16 Flush 2977-CC 1-11/16 INSTALLATION: FROM INSIDE FORT 1-11/16 INSIDE VIEW 59
SWING BEAM SIDE WINDOWS FORT SIDE VIEW #8 x 3/4" Flat Head Phillips Screws x20 EQUAL 2855-CC PF2290 PF2990 x2 EQUAL 1-1/8" 1-1/8" OUTSIDE VIEW VIEW ROOF FRAME Orient 2963-CC so that pre-drilled holes at the top are horizontal. If the holes are not horizontal, rotate the board. Secure 2964-CC and 2963-CC using 3" screws.
ROOF FRAME Flush 3/4 x 3-3/8 x 47-1/8" 1 x 3-3/8 x 47-1/8" 2972-CC x1 x1 2971-CC Use pre-drills 3/4" 2-1/2" Wood Screws x8 Pre-drill 1/8" x 1" deep for screws to avoid splitting. ACCESSORIES NOTICE STOP! INSTALL THE WOOD ROOF ON YOUR PLAYSET AT THIS TIME. REFER TO THE WOOD ROOF MANUAL FOR INSTALLATION.
INSTALL SWINGS Attach Playset Plaque using one 1" philips head screw (provided) at each corner of plaque. SA 4220 x1 WS 1501 TRAPEZE WS 4885 WS 4885 SWING SWING 8" 8" Minimum when occupied. Adjust chains at Top.
STEERING WHEEL INSTALL Install WS 4412 inside fort. Flat Washer 1-1/2" Lag Bolt DO NOT OVER-TIGHTEN LAG BOLT. Steering Wheel Cap WS 4412 x1 TELESCOPE INSTALL Telescope and Bracket 1. Position Mounting Bracket in desired location (any Top Rail). WS 4610 x1 2. Attach Mounting Bracket to Top Rail using the Mounting Screw provided. 3. Insert the Telescope into the Mounting Bracket as shown.
STAKES FORT Metal Anchor Straps x2 Flat Washers x2 Metal Anchor Straps x2 1-1/2" Lag Bolts x2 SW I NG Flat Washers x2 S WS 4521 x2 1-1/2" Lag Bolts x2 WS 4521 x2 Install stakes into 3 x 3" uprights. Locate stakes as shown. Make sure all base pieces and uprights are resting flat on the ground. It may be necessary to loosen the soil beneath Playset to make everything level. TOWER UPRIGHT A FRAME Instructions for anchoring your playset product to the ground. 1.
ACCESSORIES CLIMBING ROPE 2968-CC OPTIONAL: Tie several single knots in locations to allow logical hand-grab points. 2974-CC Step 1 Feed top of Climbing Rope through front of Upper Rail (2968-CC) and tie a double knot on the back side (Fig. 1). Step 2 Feed lower end of Climbing Rope through hole in Rock Wall board (2974-CC) and tie a double knot on the back side (Fig. 1). Fig. 1 For Safety, insure that the rope is tight enough so that it can not be looped back on itself.
ACCESSORIES SAFETY HANDLES - STEP LADDER WS 4410 x3 1-1/2" Lag Bolt Flat Washer x6 DO NOT OVER-TIGHTEN LAG BOLTS.
FLAGS ACCESSORIES 1 Locate flag base EQUALLY from top, bottom and end of upper top rail (Fig. 1). 2 Attach each flag with 4 screws. Fig. 1 EQUAL EQUAL 3/4" Truss Head Screws FRONT SIDE x4 ACCESSORIES TUBE SLIDE STOP! IMPORTANT! THE FOLLOWING STEPS ARE USED TO ASSEMBLE THE MOUNTING FRAME FOR THE TUBE SLIDE. THIS PROCEDURE SUPERCEDES THE FRAME MOUNTING INSTRUCTIONS ORIGINALLY PACKAGED WITH THE TUBE SLIDE. USE THE TUBE SLIDE INSTRUCTIONS TO ASSEMBLE THE TUBE SLIDE.
TUBE SLIDE PARTS LIST 3/4 x 2 x 23" 1-3/8 x 3 x 11-1/4" 2893-CC 2892-CC 2891-CC x1 x1 3 x 3 x 18" 3/4 x 3-3/8 x 27-3/4" 3/4 x 3-3/8 x 23" 2888-CC 1-3/4 x 3-3/8 x 33-1/2" 2887-CC x1 x1 3/4 x 5-3/8 x 23" 2894-CC x10 2889-CC 3" Wood Screws 1-1/4" Wood Screws x6 2" Wood Screws TUBE SLIDE MOUNTING FRAME Flush 3/4 x 3-3/8 x 27-3/4" 2888-CC Flush 2" Wood Screws x3 68 x1 3/4 x 3-3/8 x 34-5/8" 2890-CC x1 x45 x2 x2
TUBE SLIDE MOUNTING FRAME x10 1-1/4" Wood Screws 3/4 x 3-3/8 x 34-5/8" 2889-CC 3/4 x 5-3/8 x 23" 2890-CC TUBE SLIDE MOUNTING FRAME 3/4 x 3-3/8 x 23" 2887-CC x10 1-1/4" Wood Screws 3/4 x 3-3/8 x 34-5/8" 2889-CC 69
TUBE SLIDE MOUNTING FRAME 3/4 x 3-3/8 x 27-3/4" 2888-CC 1-1/4" Wood Screws x12 NOTE: Three screws from FRONT SIDE Deck Boards removed for clarity.
TUBE SLIDE SLIDE SUPPORT NOTE: 1-3/8 x 3 x 11-1/4" 2893-CC Refer to the tube slide instruction manual for steps to assemble and attach the tube slide and tube slide supports to the playset.
WARRANTY WARRANTY REGISTRATION Please complete your warranty registration to properly validate your warranty. Register your product online at:www.OnlineWarranty.net. Backyard Play Systems warrants the following: 1. All wood components have a Limited Five Year Warranty. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a three year Limited Warranty applicable on playsets installed by Backyard Play Systems.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
2695-RF - NOTICE This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! IMPORTANT: THIS MANUAL SUPERSEDES THE MANUAL PACKED IN YOUR KIT. USE IT TO ASSEMBLE YOUR MONKEY BARS! NOTE: YOU MAY HAVE EXTRA FASTENERS AFTER FINISHING ASSEMBLY. Call Us First! DO NOT RETURN TO STORE.
(This page intentionally left blank.
2695-RF Backyard Play Systems Customer Service 1-866-890-2211 1000 Ternes Monroe, MI 48162 10/24/2017 Model 34037 Monkey Bar Accessory Recommended for Ages 3 to 11 Tools Required Socket Set Ratchet Socket Extension Hammer Phillips Bit - BEFORE YOU BEGIN First... Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
M O N K E Y B A R PA R T S L I S T End Ladder Angle Brace Anchor 1-3/8 x 3-3/8 x 57" 2983-CC x2 WS 4522 x2 End Ladder Bottom Support 1-3/8 x 3-3/8 x 80-1/2" 2985-CC x1 Top Ladder Rail Support 1-3/8 x 3-3/8 x 78" 2984-CC x2 End Ladder Rail Support 1-3/8 x 3-3/8 x 81-1/16" 2 2986-CC x2
M O N K E Y B A R H A R D WA R E - NOTICE - Depending on your playset model, you will have extra hardware left over. 3/8" x 1-1/2" BUTTON HD.
MONKEY BAR METAL PARTS 18-1/2" Flat Metal Bracket L-Bracket 2023 x2 Top Rung 2084 x2 PF 4972 x5 21-1/2" End Rung PF 3297 x3 FASTENERS FOR METAL RUNGS 2-1/2" Lock Washer x16 x16 Flat Washer 1/4" Pan Head Screw Space intentionally left blank.
PLAYSET ORIENTATION BACK SIDE 6' SAFETY AREA LEFT SIDE REFER TO PLAYSET INSTRUCTION MANUAL FOR SAFETY AREA RIGHT SIDE 6' SAFETY AREA FRONT SIDE TOP RAIL MONKEY BARS 1-3/8 x 3-3/8 x 78" 2984-CC x2 1" x 18-1/2" PF 4972 x5 2-1/2" Pan Head Screw 1/4" Lock Washer Align with pre-drilled holes Flat side against wood.
END RAIL ASSEMBLY 1-3/8 x 3-3/8 x 81-1/16" 2986-CC x2 1 x 21-1/2" PF 3297 2-1/2" Pan Head Screw x6 x3 1/4" Lock Washer Flat side against wood.
END LADDER / TOP LADDER ASSEMBLY END RAIL Flat Washer Lock Washer 1-1/2" Button Head Screw T-Nut 3-1/4" Hex Bolt TOP RAIL Lock Washer Flat Washer T-Nut 1-1/2" Button Head Screw Flat Washer Lock Washer 3-1/4" Hex Bolt 7 Lock Washer Flat Washer
INSTALL ANGLE BRACES / BOTTOM SUPPORT Flat Washer (x2) Lock Washer 3-3/4" Hex Head Bolt (x2) T-Nut 1-3/8 x 3-3/8 x 57" 2983-CC x2 2-1/2" Hex Head Bolt (x2) Lock Washer Flat Washer 4-3/4" Hex Head Bolt (x2) T-Nut 2985-CC x1 1-3/8 x 3-3/8 x 80-1/2" 2-1/2" Hex Head Bolt T-Nut (x2) Lock Washer Flat Washer (x2) T-Nut NOTE: Counter-bore of 2985-CC toward rear side of ladder.
MONKEY BAR INSTALL POSITION * USE CARE WHEN INSTALLING MONKEY BAR ASSEMBLY SLIDE SIDE SWING BEAM SIDE * TWO PEOPLE AND A STEP LADDER ARE RECOMMENDED FOR THIS STEP MONKEY BAR INSTALL - STEP 1 10" FROM INSIDE OF 3x3 CORNER POST. Flush at TOP. 10" Mark two drill-holes. 9 *Hint – Clamp Monkey Bar Assembly in place while marking holes.
MONKEY BAR INSTALL - STEP 2 Drill-Through 3/16" marked locations. Re-Drill through using 7/16" bit from inside fort.
INSTALL ANCHOR STAKES Metal Straps 1/4 x 1-1/2" Lag Bolts x2 WS 4522 x2 Flat Washers Install on Bottom Rail. x2 x2 Instructions for anchoring your playset product to the ground. 1. Determine the final location of your playset product. 2. Place the Anchor Stakes adjacent to the base and near the corners of your playset product (at the bottom of the legs on swing sets) and twist the auger-style Anchor Stakes into the ground until only the loop is exposed. 3.
WARRANTY Backyard Play Systems warrants the following: 1. All wood components have a Limited Five Year Warranty. • Treated Wood - Backyard Play Systems will replace treated wood which becomes structurally unfit due solely to damage caused by fungal decay or termites. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a one year Limited Warranty applicable on playsets installed by Backyard Play Systems.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 7:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
2694-RF - NOTICE This playset product is not intended for public use. It is intended for residential application and is not warranted for public or commercial use. STOP! Call Us First! DO NOT RETURN TO STORE. For immediate help with assembly or product information Call our toll-free number: 1-800-890-2211 April through October M - F 8:00 AM to 6:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST or email: customerservice@backyardproductsllc.
(This page intentionally left blank.
2694-RF Backyard Play Systems Customer Service 1-866-890-2211 1000 Ternes Monroe, MI 48162 Cedar Roof Accessory 01/29/2018 Model 4185, 4332, 4333, 4334, 4335, 6246, 6351, 6352, 6353, 6354, 6371 Recommended for Ages 3 to 11 Tools Required Phillips Bit Combo Drive Bit Cordless Drill w/Charger Drill Bits Tape Measure - BEFORE YOU BEGIN First... Check with your homeowner’s association before assembling. Read instructions thoroughly before you begin.
W O O D PA R T S Roof Slat Top 5/8 x 5-1/8 x 51-1/8" 2987-CC x2 5/8 x 5-1/2 x 51-1/8" Roof Slat Mid 2989-CC x12 5/8 x 5-1/8 x 51-1/8" Roof Slat Bottom 2988-CC x2 5/8 x 1-1/2 x 20-3/8" 2991-CC x2 Sun Brace Center 5/8 x 5-1/2 x 13-3/16" 5/8 x 1-1/2 x 15-1/8" 2990-CC x12 Sun Brace Sun Decoration S U B - A S S E M B L E D D O R M E R PA R T S 3182-CC x1 Dormer Face H A R D WA R E 30 mm x36 3180-CC x1 Dormer Roof LEFT x74 3181-CC x1 Dormer Roof RIGHT 1-5/8" 2" x8 #8 Screw #8 Screw
ROOF FRAME INSTALL x12 1 x 3-3/8 x 47-1/8" 2-1/2" Wood Screws x1 2971-CC Flush 3/4" x2 2972-CC 3/4 x 3-3/8 x 47-1/8" Pre-drill 1/8" x 1" deep for screws to avoid splitting. SUN DECORATION INSTALL Pre-drill 1/8" pilot holes.
SUN DECORATION INSTALL Install 2991-CC centered and flush using two 30 mm screws as shown. Measure and mark rafter as shown. Install two 2990-CC's between marks using two 30 mm screws. 5/8 x 2 x 20-3/8" x1 2991-CC Flush at top. 5/8 x 2 x 15-1/8" Install 2931-CC First. 2990-CC x2 Flush at top. 2" 13 / -1 -1 / 2" 13 /2" 2-1 2-1 /2" CENTER 30 mm Wood Screws x6 SUN DECORATION INSTALL Center remaining 2990-CC's as shown. Install 2990-CC centered and flush using two 30 mm screws as shown.
ROOF PLANKS INSTALL Center 2987-CC roof boards on rafters. Ensure equal overhang on both sides; about 1". 1" Maintain 47-1/8" dimension between rafters. 1" 1-5/8" Wood Screws x8 5/8 x 5-1/8 x 51-1/8" 2987-CC x2 47-1/8" Flush at peak. ROOF PLANKS INSTALL BEGIN HERE Install all roof boards Flush. Insert panels fully seated.
ROOF PLANKS 1-5/8" Wood Screws INSTALL x32 5/8 x 5-1/2 x 51-1/8" 2989-CC x3 BEGIN HERE 5/8 x 5-1/2 x 51-1/8" x3 2989-CC x1 2988-CC 2988-CC x1 5/8 x 5-1/8 x 51-1/8" 5/8 x 5-1/8 x 51-1/8" DORMER ASSEMBLE Align brace of 3181-CC flush with right frame of 3182-CC. Ensure flush at peak, all along edge and at corner. Attach 3181-CC using #8 1-5/8" screws into middle of 3182-CC right frame. 1-5/8" Wood Screws x3 3181-CC x1 Flush along inner edge. 3182-CC x1 Pre-drill 1/8" holes through 3182-CC.
DORMER ASSEMBLE Align brace of 3180-CC flush with left frame of 3182-CC. Ensure flush at peak, all along edge and at corner. Attach 3180-CC using #8 1-5/8" screws into middle of 3182-CC left frame. Flush Flush 3182-CC x1 1-5/8" Wood Screws x3 Pre-drill 1/8" holes through 3180-CC. Flush along inner edge. 3180-CC x1 Flush DORMER INSTALL Attach assembled dormer using #8 2" screws into roof planks as shown. Install screws through dormer roof frame (Fig. 1). Pre-drill 1/8" holes.
8
WARRANTY Backyard Play Systems warrants the following: 1. All wood components have a Limited Five Year Warranty. • Treated Wood - Backyard Play Systems will replace treated wood which becomes structurally unfit due solely to damage caused by fungal decay or termites. 2. All non-wood components* have a three year Limited Warranty. *Ropes carry a one year Limited Warranty. 3. Installation labor has a one year Limited Warranty applicable on playsets installed by Backyard Play Systems.
WARRANTY Please feel free to call our Consumer Help Line Toll Free 1-866-890-2211 April through October M - F 8:00 AM to 7:00 PM EST Saturday 8:30 AM to 4:30 PM EST November through March M - F 8:00 AM to 5:00 PM EST No warranty is offered on the following: (1) equipment subject to abuse, negligence, improper installation, vandalism, acts of God, unauthorized alteration or attachment to equipment other than our own: or (2) equipment subjected to improper use, service or repair by customer or any third par
ASSEMbly INSTRUCTIONS 5' Turbo Tube Slide Note: This accessory is designed to fit a 5’ Deck height only. C A U T I O N • Do not climb on the outside of the slide • This slide is designed for home use only, not for Public Playgrounds • Product intended for children ages from 2-10 years old. WARNING: ! Assembly by an adult. IMPORTANT!! PLEASE READ BEFORE BEGINNING ASSEMBLY!! Please make sure all lumber, hardware and accessory parts are accounted for.
Turbo Tube Slide Dimensions 48-1/4'' 63-1/8'' 30 '' 32'' 72'' m imu Min Zone ty Safe 92'' 64'' 60'' 31-1/2'' 2
Proper Placement of Turbo Tube Slide on The Tower fety e Sa Slid one Z Option 3 NO Swing beam Safety Zone ty Safe e d Sli one Z Swing beam Option 2 47-1/2'' yES Swing beam Safety Zone fety e Sa Slid one Z Option 1 yES NOTE: This diagram is based on a 47-1/2’’ square deck.
Safety Checklist for Swing-N-Slide Play Sets and Accessories Observing the following statements and warnings reduces the likelihood of serious or fatal injury Installation Safety – Have You: Consulted the assembly instructions supplied with your particular model? Noted this accessory is to be used only on Swing•N•Slide approved designs? (Do not alter its design or add/remove components.) Made sure all hardware is tightened securely? (Supplied bolt covers must also be fastened securely.
This product is intended for single family home/residential use only and not intended for use in any public setting. Placement in any public setting constitutes a misuse of this product. IMPORTANT! ADDITIONAL REQUIRED SAFETY INSTALLATION INSTRUCTIONS According to ASTM requirements, all kits must be anchored to the ground and, if the unit has a climbing rope, the rope end must be anchored to the ground. If soil conditions permit stakes to be pulled out easily, cementing into ground is necessary.
Assembly Instructions TOOLS REQUIRED CIRCUlAR SAW DRIll SAFETy GlASSES & DUST MASK SQUARE 1/2" SOCKET & WRENCH TAPE MEASURE WRENCH HARDWARE INClUDED (2) 2" Wood Screw (119) 5/16'' x 3/4" Hex Head Bolts (70) 2-1/2" Wood Screw (16) 2" Lag Screw (240) 5/16'' Flat Washers (2) 1-1/4'' Lag Screw (119) 5/16'' loc nuts (1) T20 Torx® Bit (1) T30 Torx® Bit ADDITIONAl lUMbER PURCHASED SEPARATEly lUMbER CUT lIST LUMBER REQUIRED: (4) 2'' x 4'' x 96'' (2) 2'' x 4'' x 96'' 25'' 23'' 25'' 23'' (1) 2'
Assembly Instructions SlIDE COMPONENTS (1) Entrance Piece LH (1) Entrance Piece RH (9) Elbow (1) Elbow Support Bracket (1) Exit Elbow (1) Entrance Bracket (1) Exit (1) T-Bar Support Bracket 7
Assembly Instructions Fig. 1a Hex Head Bolt Washer Fig. 1 Washer Loc Nut Entrance Section - 8 bolts Entrance Bracket ENTRANCE SECTION ASSEMBLY NOTES: • At least two individuals are needed to assemble the 5' Turbo Tube Slide. • To aid in aligning holes when assembling sections, insert a screwdriver through adjacent holes to maintain hole alignment. 1. Assemble the Entrance Section by securing the top seam first, as shown in (Fig. 1) and (Fig. 1a).
Assembly Instructions x4 Fig. 2 Fig. 2a Hex Head Bolt Washer Washer Loc Nut Elbow Section - 9 bolts each Flange Opening Fig. 2b Elbow Support Bracket FlANGE DETAIl ELBOW AND EXIT SECTION ASSEMBLY 1. 2. 3. 4. Assemble the Elbow Section by securing as shown in (Fig. 2) and (Fig. 2a). Join sections using a hex head bolt, two flat washers, and a loc nut at each hole junction. NOTE: Fasten each loc nut finger tight. Each time you join parts be sure each flanged lip is mating with a flat lip.
Assembly Instructions Fig. 3 Fig. 3a Flange Opening Fig. 3b Hex Head Bolt Washer Washer Elbow Section - 12 bolts Loc Nut Fig. 3c Fig. 3d Flange Opening Hole #1 FlANGE DETAIl Slide Elbows 1. Align the first elbow section to the Entrance Section with the seams aligned and the exit facing downward. Rotate the Elbow (2) holes to the right as shown in (Fig. 3) and secure in place. Look for the Flange Opening shown in (Fig. 3a). 2.
Assembly Instructions Fig. 4 Fig. 4a Hex Head Bolt Washer Washer Loc Nut Elbow Section - 12 bolts Fig. 4c Fig. 4b Flange Opening Hole #1 Slide Elbows 1. Align third elbow so that Hole #1 aligns with the flange opening as shown in (Fig. 4) and (Fig. 4c) and secure in place. 2. Align fourth elbow so that Hole #1 aligns with the flange opening, as shown in (Fig. 4b) and (Fig. 4c) and secure in place. NOTE: Interlocking design of flanges on Elbow pieces will assist in assembly.
Assembly Instructions Fig. 5 Fig. 5a Hex Head Bolt Washer Washer Loc Nut Exit Elbow Section - 12 bolts Fig. 5b Fig. 5c Flange Opening Hole #1 Align Top Edge of Slide Base with Exit Section Seam. Slide Exit 1. Align Exit Elbow Section so that Hole #1 aligns with the opening in the flange, as shown in (Fig. 5) and (Fig. 5b) and secure in place. 2. Attach the Exit to the Exit Elbow Section so that the top of the exit matches the seams, as shown in (Fig. 5c) and secure in place. 3. Tighten all hardware.
Assembly Instructions Fig. 6 NOTE: This plan uses a generic tower to illustrate the 5' Turbo Tube Slide being attached. However, this same procedure is to be used for any Swing-N-Slide 5’ Tower Playset. 5' DECK HEIGHT Fig. 6a 2-1/2'' screw Slide Barrier Construction 1. Carefully remove your Barrier Support Boards from the barrier where you would like to place your slide, making certain you will have a clear 72'' Safety Zone for your slide. (Fig. 6).
Assembly Instructions Fig. 7 2'' x 4'' x 25'' 2'' x 4'' x 25'' (4) 2-1/2'' screws per board Fig. 7a 2'' x 4 '' 2-1/2'' screw x 23'' Slide Barrier Cont. 1. Install (2) 2'' x 4'' x 25'' Boards as shown in (Fig. 7). 2. Install (2) 2'' x 4'' x 23'' Slide Support Boards on the inside of your barrier as shown in (Fig. 7a).
Assembly Instructions Fig. 8 (3) 2-1/2'' screws per joint 31-1/2'' nit '' rU 4 u o x 2'' of Y h t id oW T t Cu 2-1/2'' screw Slide Barrier Cont. 1. Install a 2'' x 4'' board, cut to the width of your unit, as shown in (Fig. 8).
Assembly Instructions Fig. 9b Fig. 9a Approximate 1-1/4'' Gap (1) 2'' screw per side (2) 2'' lag screws (2) 5/16'' Flat Washers (2) 1-1/4'' lag screws bRACKET SHOUlD bE TIGHT AGAINST 2'' x 4'' UNDER DECK VIEW FlUSH Fig. 9 FlUSH (12) 2'' lag screws 5/16'' Flat Washer 2'' Lag screw 1-1/4'' Lag screw 2'' screw 2'' x 4'' Slide Installation 1. Lift and attach 5’ Turbo to units, as shown in (Fig. 9). Note: Two people will be required to properly align the Turbo Tube Slide with your tower. 2.
Assembly Instructions Fig. 10 FIGURE 14 2" x 4" x 11-1/4'' SUPPORT AND BRACKET ASSEMBLY 2" x 4" x 8-1/4" 2" x 4" x 18" 1. Assemble the support base as shown in (Fig. 10). 2" x 4" x 18" 2-1/2" Screws 2. Attach the support bracket to the support base using two lag bolts (Fig. 10a). NOTE: Pre-drill 1/8" pilot holes. 3. Place the support beneath the Exit and determine its final position. NOTE: Slide support should fit tightly beneath the slide to assure proper support.
Instrucciones de ensamblaje / Instructions d’assemblage ENSAMBLAJE DEL APOYO Y DE LA ABRAZADERA Fig. 10 FIGURE 14 2" x 4" x 11-1/4'' 2" x 4" x 8-1/4" 2" x 4" x 18" 2" x 4" x 18" 1. Ensamble la base del soporte como se muestra en la (Fig. 10). 2. Una la abrazadera de soporte a la base del soporte usando dos pernos con cabeza cuadrada (Fig. 10a) NOTA: Perfore previamente los agujeros pilotos de 1/8". 3. Colocar el soporte por debajo de la salida y determinar su ubicación final.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 9b Fig. 9a (2) Abertura 1-1/4" aproximada Espace d’environ 1 1/4 po Tornillo de compresión de 2" (2) (1) Tornillo de 2" por cada lado (1) Vis de 2 po par côté arandelas planas de 5/16" (2) Tire-fonds de 2 po (2) lA AbRAZADERA DEbE ESTAR APRETADA CONTRA 2" x 4" lE SUPPORT DOIT ÊTRE ACCOllÉ À lA PlANCHE DE 2 po x 4 po Rondelles plates de 5/16 po NIVEl À ÉGAlITÉ Fig.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 8 (3) Tornillos de 2-1/2 (3) Vis de 2 1/2 po par joint 31-1/2'' ad nid uu " s é x4 e nit 2" ho d o eu r t c p an x 4 e vo d ún eg 2 po geur s r e t r la la Co zà e up Co Tornillo de 2-1/2" Vis de 2 1/2 po Barrera del tobogán (cont.) 1. Instale una tabla de 2" x 4", corte al ancho de su unidad, como se muestra en la (Fig. 8). Construction de la barrière de la glissoire, suite 1.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 7 2'' x 4'' x 25'' 2'' x 4'' x 25'' (4) Tornillos de 2-1/2" por tabla (4) Vis de 2 1/2 po par planche Fig. 7a 2'' x 4 '' tornillo de 2-1/2"/Vis de 2 1/2 po x 23'' Barrera del tobogán (cont.) (4) Tornillos de 2-1/2" por tabla (4) Vis de 2 1/2 po par planche 1. Instale las (2) tablas de 2" x 4" x 25" como se muestra en la (Fig. 7). 2.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 6 NOTA: Este plano utiliza una torre genérica para ilustrar el tobogán Turbo Tube de 5’ que está tratando de unir. De todos modos, este mismo procedimiento puede seguirse para cualquier equipo de juego con torre de 5’ de Swing-N-Slide. REMARQUE : Ce plan utilise une tour standard pour illustrer la fixation de la glissoire Turbo Tube de 5 pi. Toutefois, la même procédure doit être employée pour tout ensemble de jeu Swing-N-Slide à tour de 5 pi.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 5 Fig. 5a Perno con cabeza hexagonal Boulon à tête hexagonale Arandela Rondelle Arandela Rondelle Tuerca de seguridad Contre-écrou Secciones de codo de salida - 12 pernos Section de sortie – 12 boulons Fig. 5b Apertura de la pestaña Ouverture de bride Fig. 5c Agujero n.º 1 Trou no 1 Alinee el borde superior de la base del tobogán con la unión de la sección de salida.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 4 Fig. 4a Perno con cabeza hexagonal Boulon à tête hexagonale Arandela Rondelle Arandela Rondelle Tuerca de seguridad Contre-écrou Sección de codo - 12 pernos Section en coude – 12 boulons Fig. 4c Fig. 4b Apertura de la pestaña Ouverture de bride Agujero n.º 1Trou no 1 Codos del tobogán 1. Alinee el tercer codo para que el agujero n.º 1 quede alineado con la apertura de la pestaña, como lo muestra la (Fig. 4) y la (Fig.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 3 Fig. 3a Apertura de la pestaña Ouverture de bride Fig. 3b Perno con cabeza hexagonal Boulon à tête hexagonale Arandela Rondelle Arandela Rondelle Sección de codo - 12 pernos Section en coude – 12 boulons Tuerca de seguridad Contre-écrou Fig. 3c Fig. 3d Apertura de la pestaña Ouverture de bride Trou no 1 DETAllE DE lA PESTAÑA DÉTAIl DE lA bRIDE Codos del tobogán 1.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 2 x4 Fig. 2a Perno con cabeza hexagonal Boulon à tête hexagonale Arandela Rondelle Arandela Rondelle Tuerca de seguridad Contre-écrou Secciones de 9 codos cada una Section en coude – 9 boulons chacune Apertura de la pestaña Ouverture de bride Fig. 2b Coderas Abrazadera Fixation de support de coude DETAllE DE lA PESTAÑA DÉTAIl DE lA bRIDE ENSAMBLAJE DE LAS SECCIONES DE SALIDA Y DEL CODO 1. 2. 3. 4.
Instrucciones de ensamblaje / Instructions d’assemblage Fig. 1a Perno con cabeza hexagonal Boulon à tête hexagonale Arandela Rondelle Fig. 1 Arandela Rondelle Tuerca de seguridad Contre-écrou Sección de entrada - 8 pernos Section d’entrée – 8 boulons Abrazadera de entrada Fixation d’entrée ENSAMBLAJE DE LA SECCIÓN DE ENTRADA NOTAS: • Se necesitan por lo menos dos personas para armar el tobogán Turbo Tube de 5’.
COMPONENTES DEl TObOGÁN / COMPOSANTES DE lA GlISSOIRE (1) Pieza de entrada del lado izquierdo (1) Panneau d’entrée gauche (1) Pieza de entrada del lado derecho (1) Panneau d’entrée droit (9) Codo (9) Coude (1) Coderas Abrazadera (1) Fixation de support de coude (1) Codo de salida (1) Coude de sortie (1) Abrazadera de entrada (1) Fixation d’entrée (1) Salida (1) Sortie (1) Abrazadera de soporte en T (1) Fixation de support de barre en T 9
HERRAMIENTAS REQUERIDAS / OUTILS REQUIS SIERRA CIRCUlAR SCIE CIRCUlAIRE TAlADRO PERCEUSE ESCUADRA ÉQUERRE CINTA MÉTRICA RUbAN À MESURER GAFAS DE SEGURIDAD y MÁSCARA ANTIPOlVO lUNETTES DE SÉCURITÉ ET MASQUE ANTIPOUSSIÈRES CUbOS DE 1/2" CON UNA llAVE DE CUbOS DOUIllE ET ClÉ À MOlETTE DE 1/2 PO llAVE DE CUbOS ClÉ ANGlAISE SE INClUyEN lOS ACCESORIOS / QUINCAIllERIE COMPRISE (2) tornillo para madera de 2" (2) Vis à bois de 2 po (119) pernos de cabeza hexagonal de 5/16" x 3/4" (119) Boulons à tête hexago
Este producto ha sido ideado para su uso en una residencia u hogar de una sola familia y no para usarse en lugares públicos. Su uso en lugares públicos constituye una mala utilización de este producto.
Liste de vérification de sécurité pour les ensembles de jeu et les accessoires Swing-N-Slide Atender los siguientes enunciados y advertencias reduce la posibilidad de lesiones graves o fatales. Seguridad durante la instalación – Usted: ¿Ha consultado las instrucciones de ensamblaje suministradas con su modelo en particular? ¿Ha notado que este accesorio se debe usar solamente con diseños aprobados por Swing•N•Slide? (No altere su diseño ni añada/retire componentes).
Ce produit est destiné à un usage résidentiel et familial seulement et n'est pas conçu pour une utilisation dans un endroit public. L'installation de ce centre de jeu dans un endroit public constitue une mauvaise utilisation de ce produit.
Lista de control de seguridad para los juegos y accesorios Swing-N-Slide L’observation des déclarations et des avertissements suivants réduit les risques de blessures graves ou mortelles IInstallation sécuritaire - Avez-vous : Consulté les instructions d’assemblage fournies avec l’unité de jeu? Noté que cet accessoire convient uniquement aux unités de jeu Swing•N•Slide approuvées? (ne modifiez pas sa composition et n'ajoutez ni ne retirez de composantes); Vérifié que toute la quincaillerie est solidement fi
Colocación correcta del tobogán Turbo Tube en la torre Emplacement approprié de la glissoire Turbo Tube sur la tour Opción 3 / Option 3 ad urid seg a de bogán té Zon to ri del e sécu oire ed Zon la gliss de NO NON Zona de seguridad de la viga del columpio Zone de sécurité de la poutre de la balançoire Viga del columpio Poutre de la balançoire dad guri e s a de gán Zon el tobo urité c d e sé oire d e Zon la gliss de Opción 2 Option 2 47-1/2'' SÍ OUI Zona de seguridad de la viga del columpio Zone de s
Dimensiones del tobogán Turbo Tube Dimensions de la glissoire Turbo Tube 48-1/4'' 63-1/8'' 30 '' a de ínim a m ridad é Zon it u seg sécur le e de Zon minima 32'' 72'' 92'' 64'' 60'' 31-1/2'' 2
INSTRUCCIONES DE ENSAMblAJE INSTRUCTIONS D’ASSEMblAGE Tobogán Turbo Tube de 5' Glissoire Turbo Tube de 5 pi Nota: Este accesorio está diseñado para colocarse en plataformas de 5 pies de alto únicamente. Remarque : Cet accessoire est conçu pour s’adapter à une plate-forme haute de 5 pi seulement. • PRECAUCIÓN MISE EN GARDE No trepar por el exterior del tobogán • Ne pas grimper sur l’extérieur • Este tobogán está diseñado para ser usado en casa, no para sitios públicos de juego.
