Instructions / Assembly

1212 Barberry Drive | Janesville, Wisconsin 53545 | www.swing-n-slide.com | 1-800-888-1232
Specifications subject to change without notice. | Las especificaciones sujetas cambiar sin nota. | Les spécifications exposent pour changer sans la notification.
American Society of
Testing Materials
MEETS OR EXCEEDS
SAFETY STANDARDS
American Society of
Testing Materials
MEETS OR EXCEEDS
SAFETY STANDARDS
MAXIMUM WEIGHT LIMIT 55 LBS | LÍMITE MÁXIMO DE PESO DE 55 LB. (25 KG) | POIDS LIMITE MAXIMUM 25 KG (55 LB)
AGES 18 MONTHS TO 3 YEARS | NIÑOS DE 18 MESES HASTA 3 AÑOS DE EDAD | ÂGÉS DE 18 MOIS À 3 ANS.
LA 6326
Made in China
Hecho en la China
Fait dans la Chine
TB/NE 1539
Flexible T-Bar
pivots for easy entry and snug fit
La barra en T es flexible
y gira para facilitar la entrada y
ajustar cómodamente
La barre en T flexible
pivote pour un accès facile et un
ajustement parfait
High seat back
features advanced mold resistant
and water repellant padding
La parte alta del respaldo
tiene un avanzado relleno molde
resistente y repelente al agua
Le haut dossier
est équipé de coussinets
résistant à moule et hydrofuge
Heavy-duty construction
meets guidelines set by the American
Society for Testing Materials (ASTM)
La estructura es resistente
y cumple con los requisitos de la ASTM
(Sociedad Americana Pruebas de Materiales)
La construction robuste
répond aux normes de l’American
Society for Testing Materials (ASTM)
Step 3:
Strap the Lap Belt around your child’s waist and securely
snap the buckle in place. The fit of the Lap Belt should be
snug, but not overly tight or constricting.
Note: The Lap Belt is always to be used when a child
is in the Swing Seat.
Step 2:
Swing the T-Bar assembly open, away from the seat. With the T-Bar
in its fully open position you should have plenty of room to
comfortably place your child in the Swing Seat.
Step 1:
With your fingers, reach underneath arm rests on each
side of seat and pull tabs outward, allowing the T-Bar to
pivot away from seat.
TB/NE 1539
NOTE: When hanging accessory next to other components, a minimum
clearance of at least 8" from adjacent swinging elements or any play equipment support structure is
required. Additional safety requirements including use zones apply. Consult your assembly instructions for
your particular Swing-N-Slide model.
Safety First:
• Installation of proper shock absorbing material is required. Consult the owner’s manual of your original
Swing-N-Slide kit for depth requirements.
• Never leave occupant unattended in child seat.
• Always secure child with Lap Belt and T-Bar.
• Check moving parts and rope for wear at one month intervals.
• Do not allow children to play on equipment when it is wet.
• On-site adult supervision must be provided at all times.
• This is not a complete list of safety information. Consult the plan and guide of your original
Swing-N-Slide kit for a complete list of safety instructions.
Maintenance:
• Occasionally check to make sure water drainage holes remain unplugged. Clean them if necessary.
• Do not allow debris or loose materials to accumulate in seat.
• Periodically inspect cushions for wear, replace if torn or damaged.
Comfy-N-Secure Coaster Swing
1
2
3
Step 4:
Swing the T-Bar shut, inserting the tabs into the slots in
th
e
seat. Push down on T-Bar until the tabs lock in place. This
will provide
your
child
with
added security and a
soft,
com-
fortable
place to grip.
Note: The
T
-Bar is a
lways
to b
e
locked securely
in
place
when
the
swing is
in motion.
4
© PlayCore Inc. 2012 LA 6190
Comfy-N-Secure
Coaster Swing
™
R
SCAN ME with your smart phone
ESCANEAR ME con su teléfono inteligente
ME SCANNER à votre téléphone intelligent