Manualshelf

Instructions / Assembly

ManualsBrandsSwing-N-Slide Playsets ManualsParks, Playsets & PlayhousesChesapeake Deluxe Wood Complete Playset with Chalkboard
51525354555657585960
59
STEP 47
Anchor-It
Anchor-It Strap
1-1/2” Lag
Screw
5/16” Washer
5/16’’ x 1-1/2” Lag Screw (x4)
Fold up
1. Place swing set in nal location and mount Anchor-It(s) at locations circled above.
2. Twist the Anchor-It into the ground until only the loop is exposed.
3. Place Anchor-It Strap thru loop, fold the ends together and attach to the unit as shown.
Note: Keep as little play as possible using any of the holes in the strap that work best.
TIP: When installing Anchor-Its in rocky or hard soil, create a starter hole at the desired locations using either a 16’’ Concrete
Drill Bit, or a long screw driver then insert and install the Anchor-Its as shown. This will allow you to get traction with the Anchor-It
faster and allow the device to seat more securely.