Instructions / Assembly

Anchor-It Installation.

nnssttrruuccttiioonnss ffoorr AAnncchhoorriinngg SSwwiinngg••NN••SSlliiddee AAccttiivviittyy CCeenntteerrss

1. De

termine the final location of your activity center.

2. Place the Anchor-It stakes adjacent to the base and near the corners of

your activity center (at the bottom of the legs on swing sets) and twist the

auger-style stakes into the ground until only the loop is exposed.

3. Place the metal strap through the loop of the Anchor-It stake and secure

it to the unit with a lag screw and washer as illustrated to the right.

Note: Attach the strap to the unit with as little play as possible using

whatever holes in the strap that work best.

Anchor-It

Fig. 12

1'' Truss Screw

Use truss head screws to

to secure slide to deck.

Slide Installation.

1. Install Slide centered in the provided

opening as shown in (Fig. 12).

2. Attach Stake to end of slide as shown in

(12a).

Fig. 13

1-1/2"

Lag Bolt

Metal

Strap

Anchor-It

PineBluff Assembly Instructions

2'' Above Ground

(2)

1-1/4'' screws

per joint

2'' x 4'' x 17-1/4''

Fig. 12a

5/16'' Flat

Washer