Instructions / Assembly

31
SWING BEAM
ASSEMBLE
DO NOT FULLY TIGHTEN
CARRIAGE BOLTS AT THIS TIME
Align holes and insert carriage bolt.
Repeat where arrows are shown.
Flat Washer
x4
Lock Nut
x4
3-3/4" Carriage Bolt
SWING BEAM ASSEMBLE
6-1/2" Carriage Bolt
Torque Washer
Flat Washer
Lock Nut
NOTE: You may need to tap bolts
with hammer to get through holes.
Clean all debris from bolt threads
before installing lock nuts.