Installation & Assembly
10
USE THE CORRECT FASTENER
Use the guides below to help select the correct length, quantity & location of
screws for the board installation.
Avoid splitting your lumber by offsetting your screws at least 3/4” from edge.
$OOKDUGZDUHVKRXOGEHGULYHQXQWLOÀXVKZLWKWKHVXUIDFHRUQRGHHSHUWKDQ´
1x4 to 2x4 & 3x3
´VFUHZV
per attachment point
1x4 to 1x4
(2) 30mm screws
per attachment point
English(*) Metric(Cm ) English(*) Metric(Cm )
1x4 2.5x10.2 5/8x3-3/8 1.59x8.57
1x5 2.5x12.7 5/8x4-1/2 1.59x11.43
5/4x4 3.2x10.2 1x3-1/2 2.5x8.89
5/4x6 3.2x15.3 1x5-1/2 2.5x14
2x2 5x5 1-1/2x1-1/2 3.8x3.8
2x3 5x7.6 1-1/2x2-1/2 3.8x6.4
2x4 5x10 1-1/2x3-1/2 3.8x9
2x6 5x15.3 1-1/2x5-1/2 3.8x14
3x3 7.6x7.6
4x4 10x10 3-1/2x3-1/2 9x9
(*) Estim ated Sizing Due to Cutting Process
NOMINAL MATERIAL SIZE
LISTED SIZE TRUE SIZE
7.6x7.6
3x3