Instructions / Assembly

• Use a water sealant on your beams to protect the wood and prevent
cracking and warping.
• Install the swing set only on a level surface.
• Never install the swing set on a hard surface such as tiles, concrete,
packed earth etc. Only install the swing set over a soft and proper
shock-absorbent material such as wood chips, mulch or shredded
rubber, of sufficient depth – between 9-12”. Dirt and grass, which are
the most prevalent surfaces under home playground equipment, do not
adequately protect children from serious head injuries.
• Do not install loose fill surfacing over hard surfaces such as concrete or
asphalt.
• The swing set should be placed at least 6ft from any surrounding
structures, and surface material should extend the full 6ft around the
swing set in all directions.
• Remove any tripping hazards, such as rocks, tree stumps, loose toys
etc. from the play area.
• Always anchor your swing set into the ground to prevent movement and
guarantee stability when the swing set is played on.
Carefully read the following instructions BEFORE using your Swingan
product. This information was meticulously put together for your safety
and to reduce risk of injury. Always keep the safety of your children in
mind as you build your set and as your children play on it.
INSTRUCTIONS FOR USE – SAFETY INSTRUCTIONS
SAFETY ADVISORIES
INSTALLATION
PAGE 3