Use and Care Manual

ASSEMBLING THE BELT SWING
HANGING THE SWINGS
1. Collect the belt swing seat and the two coated chains.
2. Thread the S-Hook on the end of a chain through the hole on one end
of the swing seat.
3. Crimp the hook opening closed using pliers to secure the connection.
(See Image)
4.Repeat steps 2-3 with the S-Hook on the other chain, connecting it to
the hole on the other end of the swing seat.
All the swings are now fully assembled. Using the snap hooks at the top
There must be a minimum of 8" clearance space between the bottom of
each swing and the floor. Adjust each swing to the desired height and ....
have fun swinging!
of each chain or rope, hook each swing onto the swing hanger snap hooks,
at its designated spot. See the image below for the position of each swing.
(Image not drawn to scale.)
CRIMP THE HOOK
OPENING CLOSED
PAGE 12
NOTE: