User's Manual



SwipeSense,Inc.
4619NRavenswoodAve.
Suite202
Chicago,IL.60640
(847)440‐6215

DeviceNameModel:Device
VersionNumber
Confidential Page5of5
May2016


ProductDescription
This is an individualized device that is placed behind an employee badge that is currently worn by all
employees. This device transmits signal s to the Location Hubs and Hygiene Sensors of the employee’s
locationandacceleration.ApictureoftheSwipeSenseBadgeisprovidedinFigure1.
 
Figure1:EmployeeBadgeandSwipeSenseBadge
InstallationProcedures
1. Removeyouremployeebadgefromyourlanyardorretractablebadgeholder.
2. PlacetheSwipeSenseBadgeontothelanyardorretractablebadgeholder.
3. Attach your employee badge to the lanyard or retractable badge holder on top of the
SwipeSenseBadge.
4. Wearthelanyardorretractable badgeholderon
theupperpartofyourbodytoassureproper
transmissiontotheLocationHubsandHygieneSensors.