CHANGING YOUR LANDSCAPE SINCE 1945 Owner’s Manual 15714 2646 Bucket 15714 Volume: 3.1 ft.³ 2645R IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. ATV ACCESSORIES Sold as Separate Pieces!!!! *A Winch with a mechanical brake is required for this attachment.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
SAFETY PRECAUTIONS & DECALS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. • Read the manual. Learn to operate this machine safely.
• Operate attachments up and down slopes. There is significant risk of overturns when operating across slopes. • Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. • Never make adjustments or repairs with the engine running.
BUCKET ATTACHMENT ASSEMBLY FIGURE 1 ITEM NO. QTY. PART NO. DESCRIPTION 1 1 5500TK ATV BUCKET WELDMENT 2 1 5502TK BUCKET HITCH WELDMENT 3 1 5626TK ROLLER BUSHING 4 1 5625TK BUCKET LATCH 5 2 NB131 BOLT - 1/2-13 X 3 HCC GR5 ZP 6 2 NB245 BOLT - 3/4-10 X 3 7 2 NB609 NUT - 3/4-10 NYLOC 8 8 NB170 NUT - 5/16-18 SERR FLANGE 9 2 NB281 NUT - NYLOC 1/2-13 ZY 10 2 NB506 3/16 CLICK PIN 11 1 TR150W WASHER 12 8 10216 BOLT - CARRIAGE 5/16-18 X 3/4 GR5 13 1 2654TK PLOW MOUNT PIN 3/4 X 14.
INSTALLATION OF BUCKET ATTACHMENT TO ENSURE PROPER INSTALLATION, CARFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW REFER TO FIGURE 1 WHILE INSTALLING THE BUCKET ATTACHMENT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. BEGIN BY LAYING OUT THE PARTS SIMILAR TO FIGURE 1 ATTACH THE BUCKET HITCH(2) TO THE BUCKET(1) USING BOLTS(6) AND NUTS(7). INSTALL THE LATCH REST BOLT(5), ROLLER BUSHING(3) AND NUT(9) TO THE BUCKET. PLACE THE BUCKET LATCH(4) IN THE UPRIGHT TABS ON THE BUCKET HITCH(2) USING BOLT(5) TO HOLD IT THERE.
ADJUSTMENT AND OPERATION DROP YOUR LOAD!! AFTER INSTALLING THE BUCKET, MAKE SURE THE ROPE IS TIED TO YOUR ATV SOMEWHERE YOU CAN GRAB WHILE OPERATING. TO DROP YOUR LOAD FROM THE BUCKET, RAISE THE BUCKET WITH THE WINCH AND PULL THE ROPE. THIS WILL DISENGAGE THE BUCKET LATCH AND DROP YOUR LOAD. TO ENGAGE THE BUCKET LATCH, SLOWLY REVERSE YOUR ATV AND LOWER YOUR WINCH AT THE SAME TIME UNTIL THE BUCKET LATCH CLICKS BACK INTO LOCKING POSITION.
CHANGING YOUR LANDSCAPE SINCE 1945 Owner’s Manual ATV ACCESSORIES Bucket 15714 Volume: 3.1 ft.³ WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment.